Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: GRANITE & MARBLE BY MALAVE, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of GRANITE & MARBLE BY MALAVE, INC. in 150 INDUSTRIAL AVE., GREENSBORO, NC 27406 (NAICS 423320). OSHA activity number 307442723.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Granite & Marble by Malave, INC. for free Get an email when a new federal OSHA severe-injury report for Granite & Marble by Malave, INC. is published. One employer, no account, unsubscribe in one click.
Site address
150 INDUSTRIAL AVE.
City
GREENSBORO
State
NC
ZIP
27406
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423320
SIC code (legacy)
5032
Employees
12
Ownership type
A
Industry flags
Manufacturing safety.

6 citations on file for this inspection.

95012901

Serious 1 instance 8 exposed
Issued
Apr 15, 2004
Abate by
Aug 1, 2004
Penalty
Initial $100 · Current $100
North Carolina General Statute 95-129(1) of the Occupational Safety and
Health Act of North Carolina:  The
employer did not furnish each of his employees conditions of employment
and a place of employment free
from recognized hazards that were causing or likely to cause death or
serious physical harm to employees in
that employees were exposed to:
a)being crushed by the 1000 to 1400 pound, approximately 6 foot tall by 10
foot wide pieces of
granite or marble when they were required to lean the piece (slab) forward
(straight up) to
allow for a block to hold the piece up so that the clamp on the ABACO
Model 56 lift
attachment on the Cat, TCM, Model FHG 36N8 fork lift could clamp onto the
piece and lift it
for transport to one of the cutting machines for processing on and before
February 23, 2004.
An employee was crushed and injured on February 23, 2004 when a piece over
balanced and
fell onto him sending him to the Hospital and causing him to loose time
from work due to the
injuries.
Among other methods, one feasible and acceptable abatement method to
correct this hazard
would be to install stop bars to the boom of the lift attachment that
reached down in two
directions and would prevent the pieces (slabs) of granite from falling
back toward employees
who were holding them up for the clamp mechanism to clamp onto them for
lifting and
transport.
Recent events (2)
  • · P (S) $100.00
  • · Z (S) $100.00

1910.136 A

Serious 1 instance 23 exposed
Issued
Apr 15, 2004
Abate by
Aug 1, 2004
Penalty
Initial $100 · Current $100
Recent events (2)
  • · P (S) $100.00
  • · Z (S) $100.00

1904.32 B06

Other-than-serious 1 instance 23 exposed
Issued
Apr 15, 2004
Abate by
Apr 23, 2004
Penalty
Initial $100 · Current $100

1910.132 D02

Other-than-serious 1 instance 23 exposed
Issued
Apr 15, 2004
Abate by
Aug 1, 2004
Recent events (2)
  • · P (O)
  • · Z (O)

1910.178 A05

Other-than-serious 1 instance 8 exposed
Issued
Apr 15, 2004
Abate by
Aug 1, 2004
Recent events (2)
  • · P (O)
  • · Z (O)

1910.178 L06

Other-than-serious 1 instance 8 exposed
Issued
Apr 15, 2004
Abate by
Aug 1, 2004
Recent events (2)
  • · P (O)
  • · Z (O)

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307442723.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.