ELMWOOD PARK, IL —
OSHA Inspection: JOHNSON TOOL COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JOHNSON TOOL COMPANY in 7943 W. GRAND AVE, ELMWOOD PARK, IL 60707 (NAICS 332116). OSHA activity number 307493817.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHNSON TOOL COMPANY
- Site address
- 7943 W. GRAND AVE
- City
- ELMWOOD PARK
- State
- IL
- ZIP
- 60707
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- SIC code (legacy)
- 3469
- Employees
- 13
- Ownership type
- A
Citations
10 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $750 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the rotating blade: a)Tool Room-On or about 03/05/04 the Grob Vertical bandsaw, was not equipped with a magnetic restarter or similar device, as prescribed by American National Standards Institute (ANSI) B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply such a device would prevent the saw from restarting automatically when power is restored. b)Tool Room-On or about 03/05/04 the Johnson Cut off saw serial#B2941, was not equipped with a magnetic restarter or similar device, as prescribed by the American National Standards Institute (ANSI) B11.10-1990, Section 5.2.3.4, that in the event of an interruption in the electrical supply such a device would prevent the saw from restarting when the power is restored. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.147 C06 I
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $450 · Current $270 Reduced
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1910.178 L01 I
- Issued
- Mar 24, 2004
- Abate by
- May 10, 2004
- Penalty
- Initial $1,500 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1500.00
1910.212 A01
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $1,500 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1500.00
1910.217 C02 IA
- Issued
- Mar 24, 2004
- Abate by
- Apr 1, 2004
- Penalty
- Initial $800 · Current $800
Recent events (2)
- — I (S) $800.00
- — Z (S) $800.00
1910.217 E01 I
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.217 E01 II
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.219 B01
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- — I (S) $360.00
- — Z (S) $600.00
1910.219 D01
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (2)
- — I (S) $360.00
- — Z (S) $600.00
1910.219 E03 I
- Issued
- Mar 24, 2004
- Abate by
- Apr 19, 2004
Recent events (2)
- — I (S)
- — Z (S)
More inspections at Johnson Tool Company
View Johnson Tool Company's full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307493817.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.