DENVER, CO —
OSHA Inspection: ROCKY MOUNTAIN TRANSLOAD, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ROCKY MOUNTAIN TRANSLOAD, INC. in 1001 W. 52ND AVE., DENVER, CO 80221 (NAICS 488490). OSHA activity number 307529115.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROCKY MOUNTAIN TRANSLOAD, INC.
- Site address
- 1001 W. 52ND AVE.
- City
- DENVER
- State
- CO
- ZIP
- 80221
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 488490
- SIC code (legacy)
- 4231
- Employees
- 6
- Ownership type
- A
Citations
17 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $375 · Current $188 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to caught in-between hazards: (a)Rocky Mountain Transload, Inc. & 1001 W. 52nd Ave., Denver, CO 80221: On or before March 30, 2005, an employee rode the bucket of the JCB front-end loader from the ground up to the chute of conveyor # 2 to dislodge material stuck in the conveyor. This condition exposed the employee to hazards of falls approximately 15 feet, to being struck by the bucket, to being caught in-between moving parts of the bucket and the conveyor. Abatement Note: Abatement certification is required for this item (see enclosed "Sample J153, Surface Vehicle Recommended Practice, Section 4.3 Operator-General Precautions, instructs operators: "Do not permit riders on the machine if there are no manufacturer's designated place for the rider." In addition, Section 7.10, Operating, Precautions, instructs operator's to never allow anyone to be under or within reach while the equipment is operating.
Recent events (2)
- — I (S) $188.00
- — Z (S) $375.00
1910.134 C01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $300 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $300.00
1910.134 D01 III
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.134 H02 I
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.134 H03 IIA
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.134 K01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.147 C01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $300 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $300.00
1910.157 C04
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $225 · Current $112 Reduced
Recent events (2)
- — I (S) $112.00
- — Z (S) $225.00
1910.157 G01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.219 D01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $1,500 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1500.00
1910.305 A04 V
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.305 B02
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $300 · Current $150 Reduced
Recent events (2)
- — I (S) $150.00
- — Z (S) $300.00
1910.1200 E01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
- Penalty
- Initial $100 · Current $100
1910.1200 F05 I
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.1200 G08
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.1200 H01
- Issued
- Jul 15, 2005
- Abate by
- Aug 10, 2005
1910.134 E01
- Issued
- Jul 6, 2005
- Abate by
- Aug 1, 2005
More inspections in this industry (NAICS 488490)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307529115.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.