MONROE, LA —
OSHA Inspection: MONROE MANUFACTURING COMPANY
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MONROE MANUFACTURING COMPANY in 2813 DESIARD STREET, MONROE, LA 71201 (NAICS 326199). OSHA activity number 307600817.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MONROE MANUFACTURING COMPANY
- Site address
- 2813 DESIARD STREET
- City
- MONROE
- State
- LA
- ZIP
- 71201
- Mailing
- P. O. BOX 7416, MONROE, LA 74201
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 14
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
- Penalty
- Initial $375 · Current $375
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish to each of his employees a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by dropped loads when using hoisting devices with no latch on the lifting hooks. a) Among other methods, one feasible and acceptable method to correct this hazard is to ensure the hoisting hook is provided with a latch in accordance with American National Standards Institute (ANSI) B30.16-1973 Overhead Hoists section 16-2.1.2.10 Hooks. DISCLAIMERS 1) You are not limited to the abatement methods suggested above. 2) The methods explained are general and may not be effective in all cases. 3) The employer is responsible for selecting and carrying out an appropriate method.
1910.22 A01
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
- Penalty
- Initial $225 · Current $225
1910.23 E01
- Issued
- Jun 8, 2005
- Abate by
- Jun 22, 2005
- Penalty
- Initial $375 · Current $375
1910.23 E03 I
- Issued
- Jun 8, 2005
- Abate by
- Jun 22, 2005
1910.147 C03 II
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
- Penalty
- Initial $375 · Current $375
1910.147 C04 IIB
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
- Penalty
- Initial $375 · Current $375
1910.147 C05 I
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
- Penalty
- Initial $375 · Current $375
1910.147 C06 I
- Issued
- Jun 8, 2005
- Abate by
- Jun 20, 2005
- Penalty
- Initial $375 · Current $375
1910.147 D04 I
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
- Penalty
- Initial $375 · Current $375
1910.303 B02
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
- Penalty
- Initial $225 · Current $225
1910.304 F04
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
- Penalty
- Initial $375 · Current $375
1910.305 G02 II
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
- Penalty
- Initial $300 · Current $300
1910.37 B02
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
1910.178 L04 III
- Issued
- Jun 8, 2005
- Abate by
- Jun 20, 2005
1910.253 B04 III
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
1910.303 G01
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
1910.305 B01
- Issued
- Jun 8, 2005
- Abate by
- Jun 14, 2005
1910.305 G02 III
- Issued
- Jun 8, 2005
- Abate by
- Jun 15, 2005
More inspections at Monroe Manufacturing Company
View Monroe Manufacturing Company's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307600817.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.