BAYONNE, NJ ·
OSHA Inspection: THE HADDAD ORGANIZATION, LTD.
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of THE HADDAD ORGANIZATION, LTD. in 90 EAST 5TH ST., BAYONNE, NJ 07002 (NAICS 493110). OSHA activity number 307614131.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE HADDAD ORGANIZATION, LTD.
- Site address
- 90 EAST 5TH ST.
- City
- BAYONNE
- State
- NJ
- ZIP
- 07002
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 493110
- SIC code (legacy)
- 4225
- Employees
- 367
- Ownership type
- Private (A)
Citations
14 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
- Penalty
- Initial $2,250 · Current $2,250
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of slipping into the pit while the compactor is operating in the continuous cycle: a) Cardboard compactor: The switch to operate the continuous cycle compactor was located under the steel steps to the platform from which the employee feeds scrap cardboard to the compactor. The switch was not a sustained manual pressure control to protect the operator in the event of him reaching into the wall opening to throw material into the pit and slipping on the metal surface and being exposed to the pit while the machine was operating in the continuous cycle. One feasible and acceptable methods of abating this hazard includes but is not limited to the following method: Install a sustained-manual-pressure control located in such a way that the operator cannot reach the point of operation and within an area fully visible to the operator of the complete point-of-operation area when a guard is not used as required in" ANSI Z245-2- 1997, American National Standard for Equipment Technology and Operations for wastes and Recyclable Materials- STATIONARY COMPACTORS- SAFETY REQUIREMENTS."
1910.22 A02
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
- Penalty
- Initial $1,800 · Current $1,800
1910.23 B01 I
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
1910.24 B
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
1910.176 A
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
- Penalty
- Initial $2,250 · Current $2,250
1910.178 E01
- Issued
- Oct 6, 2004
- Abate by
- Nov 24, 2004
- Penalty
- Initial $2,250 · Current $2,250
1910.178 G02
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
1910.178 M05 III
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
1910.212 A05
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
- Penalty
- Initial $1,350 · Current $1,350
1910.303 F
- Issued
- Oct 6, 2004
- Abate by
- Nov 9, 2004
- Penalty
- Initial $1,350 · Current $1,350
1910.303 G02 I
- Issued
- Oct 6, 2004
- Abate by
- Oct 26, 2004
1910.303 H03 I
- Issued
- Oct 6, 2004
- Abate by
- Oct 19, 2004
1910.304 F05 V
- Issued
- Oct 6, 2004
- Abate by
- Oct 12, 2004
1910.151 C
- Issued
- Oct 6, 2004
- Abate by
- Oct 19, 2004
More inspections at The Haddad Organization, LTD.
View The Haddad Organization, LTD.'s full OSHA safety record →
More inspections in this industry (NAICS 493110)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 307614131.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.