Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: ACCUTRONICS INC.

Programmed Other inspection · Safety discipline

On , OSHA opened a programmed Other safety inspection of ACCUTRONICS INC. in 10488 W. CENTENNIAL ROAD, LITTLETON, CO 80127 (NAICS 334519). OSHA activity number 307652362.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Accutronics INC. for free Get an email when a new federal OSHA severe-injury report for Accutronics INC. is published. One employer, no account, unsubscribe in one click.
Establishment
ACCUTRONICS INC.
Site address
10488 W. CENTENNIAL ROAD
City
LITTLETON
State
CO
ZIP
80127
Inspection type
Programmed Other (K)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (N)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334519
SIC code (legacy)
3599
Employees
69
Ownership type
Private (A)

14 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Penalty
Initial $3,000 · Current $1,500 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The
employer did not
furnish employment and a place of employment which were free from
recognized hazards
that were causing or likely to cause death or serious physical harm to
employees where
employees were exposed to the hazard of flash fire and explosion from
magensium dust(s):
a)  On December 22, 2004, and at times prior, employees involved in the
manufacture of
magnesium parts were exposed to injuries, in that:
1. Magnesium dust was not collected by means of a suitable hood or
enclosure at each
location where sanding of magnesium parts was taking place.
2. Where employees were sanding magnesium parts hoods were not connected
to a
wet type collector, or a cyclone collector, equipped with blowers located
outside the
structure or building and in a safe area.
3. Employees involved in sanding magnesium parts were not following the
appropriate safety precautions or wearing the appropriate personal
protective
equipment (e.g. clothing was not flame resistant).
Among other methods, one feasible and acceptable abatement method is to:
1. Install a wet or dry dust collection system as outline and identified
in Chapter 4-2,
NFPA 480, 1998 Edition;
2. Follow cleaning instructions outlined by Chapter 4 and Chapter 7, NFPA
480,
1998 Edition.
3. Institute the Fire Prevention and Fire Protection guidelines in Chapter
9, NFPA
480, 1998 Edition.
Abatement Note:  Abatement certification and documentation is required for
this item
(see enclosed "Sample Abatement-Certification Letter").
Recent events (2)
  • · I (S) $1500.00
  • · Z (S) $3000.00

1910.132 D01

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Penalty
Initial $3,000 · Current $1,000 Reduced
Recent events (2)
  • · I (S) $1000.00
  • · Z (S) $3000.00

1910.134 A02

Serious Gravity 10 2 instances 2 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.156 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Penalty
Initial $3,000 · Current $1,000 Reduced
Recent events (2)
  • · I (S) $1000.00
  • · Z (S) $3000.00

1910.156 B02

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.156 C01

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.156 E01 I

Serious Gravity 10 1 instance 2 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.157 G03

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.165 D02

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Penalty
Initial $3,000 · Current $3,000
Recent events (2)
  • · I (S) $3000.00
  • · Z (S) $3000.00

1910.307 B

Serious Gravity 10 3 instances 1 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Penalty
Initial $3,000 · Current $1,500 Reduced
Recent events (2)
  • · I (S) $1500.00
  • · Z (S) $3000.00

1910.1200 E01

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Apr 18, 2005
Penalty
Initial $3,000 · Current $1,000 Reduced
Recent events (3)
  • · P (S) $1000.00
  • · I (S) $1000.00
  • · Z (S) $3000.00

1910.1200 F05 I

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.1200 F05 II

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

1910.1200 H

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 28, 2005
Abate by
Mar 14, 2005
Recent events (2)
  • · I (S)
  • · Z (S)

View Accutronics INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 307652362.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.