ASHEVILLE, NC —
OSHA Inspection: VAN LOTT, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VAN LOTT, INC in 101 BRUCE RD., ASHEVILLE, NC 28806 (NAICS 423830). OSHA activity number 307672162.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VAN LOTT, INC
- Site address
- 101 BRUCE RD.
- City
- ASHEVILLE
- State
- NC
- ZIP
- 28806
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423830
- SIC code (legacy)
- 5084
- Employees
- 19
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
28 citations on file for this inspection.
95012901
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: a) facility wide -- when asked, the employer failed to provide any record of periodic inspections of the crane in service at the time of the inspection ( 2 Ton jib crane in mechanical shop, work bays G through I ). REFERENCE: ANSI B30.11-2.1.5: Dated evidence of the inspection of critical items such as hoisting machinery, sheaves, hooks, chains, ropes, wheels, and other lifting devices, as required in 11-2.1.1(b)(2), shall be maintained. This evidence should be kept where available to appointed personnel.
Recent events (2)
- — I (S)
- — Z (S) $750.00
95012901
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: a) facility wide -- when asked, the employer failed to provide record of load test of the crane in service at the time of the inspection ( 2 Ton jib crane in mechanical shop, work bays G through I ). REFERENCE: ANSI B30.11-2.2.2: Prior to initial use, all new, extensible repaired, and altered equipment should be tested and inspected by, or under the direction of, an appointed or authorized person, and a written report should be furnished by such person, confirming the load rating of the system. The test reports shall be place on file.
Recent events (2)
- — I (S)
- — Z (S) $750.00
95012901
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750 · Current $750
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: a)facility wide -- it was observed that the below the hook lifting devices in service at the time of the inspection ( metal thong ), did not have any markings for the rated load. b)facility wide -- it was observed that the below the hook lifting devices in service at the time of the inspection ( metal thong ), did not have a nameplate or other permanent markings for the identification of manufacturer name or serial number. REFERENCE: ANSI B30.20-1.2.1( 1968 ), (a )Rated Load. The rated load of the lifting device shall be marked on the main structure where it is visible.(b)Identification. A nameplate or other permanent marking shall be affixed displaying the following information: (1) manufacturers name and address, (2) serial umber, (3) lifter weight (4) rated load.
95012901
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750 · Current $750
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: a)facility wide -- when asked, the employer representative fail to provide copy of the inspection reports of below the hook lifting devices in service ( metal thongs ). b)facility wide -- when asked, the employer representative fail to provide copy of the inspection reports of below the hook lifting devices in service ( 2 load levelers ). REFERENCE: ANSI B30.20-1.3.6( 1968 ), Dated inspection records shall be made on critical items such as those listed in para. 20.1.3.4. Records should be available to appointed personnel for each periodic inspection and when the lifter is either modified or repaired.
1910.179 J02
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750
Recent events (2)
- — I (S)
- — Z (S) $750.00
1910.179 J03
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
Recent events (2)
- — I (S)
- — Z (S)
1910.179 K02
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
Recent events (2)
- — I (S)
- — Z (S)
1910.184 E01
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $750 · Current $750
1910.184 E03 II
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.184 E04
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.303 G02 II
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
- Penalty
- Initial $525 · Current $525
1910.303 B02
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.304 E01 IV
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.305 B01
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.305 E02
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1910.305 J01 IV
- Issued
- May 27, 2004
- Abate by
- Jun 4, 2004
1904.2 A
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
- Penalty
- Initial $1,000
Recent events (2)
- — I (O)
- — Z (O) $1000.00
1910.106 B02 VIIA
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.106 G03 IVD
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.124 G02
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.134 C01
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.151 C
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.157 C01
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.176 B
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.215 A04
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.252 B02 III
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.1200 E01
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
1910.1200 G01
- Issued
- May 27, 2004
- Abate by
- Jun 15, 2004
More inspections at VAN Lott, INC
View VAN Lott, INC's full OSHA safety record →
More inspections in this industry (NAICS 423830)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307672162.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.