SENECA FALLS, NY ·
OSHA Inspection: SENECA IRON WORKS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SENECA IRON WORKS INC. in 3236 HOSTER ROAD, SENECA FALLS, NY 13148 (NAICS 332116). OSHA activity number 307690297.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SENECA IRON WORKS INC.
- Site address
- 3236 HOSTER ROAD
- City
- SENECA FALLS
- State
- NY
- ZIP
- 13148
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- SIC code (legacy)
- 3469
- Employees
- 11
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $750
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the overhead hoist, below-the- hook lifting devices or bridge crane system fail: a)At the establishment, on or about 5/3/05: Hoists were not being inspected on a frequent or periodic basis. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: Conduct frequent and periodic inspections of the hoists for wear, deterioration and malfunction as per ANSI B30.16-1993 Section 16-2.1. b)At the establishment, on or about 5/3/05: CM hoists had missing safety latches on the lifting hooks. Among other methods, one feasible and acceptable abatement method to correct this hazard is to: Install new safety latches on the lifting hooks in accordance with ANSI B30.16-1993 Section 16-1.2.9. c)At the establishment, on or about 5/3/05: The supporting structures had not been rated for hoists including, but not limited to; CM hoists in that they were attached to the lower roof trusses. Among other methods, one feasible and acceptable abatement method to correct thishazard is to: Prior to installation and use, ensure the supporting structures are designed to withstand the loads and forces imposed by the hoist for the rated load in accordance with ANSI B30.11-1980, Section 11-2.2.2. Abatement certification must be submitted for these items.
Recent events (2)
- · J (S)
- · Z (S) $750.00
1910.147 C01
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $750
Recent events (2)
- · J (S)
- · Z (S) $750.00
1910.101 B
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $450
Recent events (2)
- · J (S)
- · Z (S) $450.00
1910.178 L01 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $600
Recent events (2)
- · J (S)
- · Z (S) $600.00
1910.184 E09 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $600
Recent events (2)
- · J (S)
- · Z (S) $600.00
1910.212 A01
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $750
Recent events (2)
- · J (S)
- · Z (S) $750.00
1910.212 A03 II
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $750
Recent events (2)
- · J (S)
- · Z (S) $750.00
1910.217 B04 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 18, 2005
- Penalty
- Initial $1,500
Recent events (2)
- · J (S)
- · Z (S) $1500.00
1910.217 C01 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 18, 2005
Recent events (2)
- · J (S)
- · Z (S)
1910.217 E01 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
Recent events (2)
- · J (S)
- · Z (S)
1910.219 D01
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
- Penalty
- Initial $750
Recent events (2)
- · J (S)
- · Z (S) $750.00
1910.219 E01 I
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
Recent events (2)
- · J (S)
- · Z (S)
1910.305 B01
- Issued
- Jul 13, 2005
- Abate by
- Jul 31, 2005
Recent events (2)
- · J (O)
- · Z (O)
More inspections in this industry (NAICS 332116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 307690297.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.