HATO REY, PR ·
OSHA Inspection: A MARRERO AUTO GLASS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of A MARRERO AUTO GLASS in 204 AVENIDA MUNOZ RIVERA PDA 27, HATO REY, PR 00919 (NAICS 811122). OSHA activity number 307928069.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A MARRERO AUTO GLASS
- Site address
- 204 AVENIDA MUNOZ RIVERA PDA 27
- City
- HATO REY
- State
- PR
- ZIP
- 00919
- Mailing
- PO BOX 31142 65TH INF STATION, SAN JUAN, PR 00924
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811122
- SIC code (legacy)
- 7536
- Employees
- 2
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
6A0001
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $750 · Current $750
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: At A. Marrero Auto Glass Shop area, it was observed a diesel Max Lite Electric Generator without serial number on the shop area. The Generator was used to provide energy to the establishment, it was producing a great amount gases inside the struture. The employees were seeking glasses and installing its. Hazard: Inhalation of toxic gases. Among other correction methods, a feasible and aceptable method to correct this hazard is to remove the Electric Generator from the area. En el taller de A. Marrero Auto Glass, se observo un Generador Electrico de Diesel marca Max Lite sin numero de serie en el area del taller, el Generador estaba siendo utilizado para proveer energia al establecimiento, este estaba produciendo una gran cantidad de gases toxicos en el interior del establecimiento. Los empleados buscaban y instalaban cristales de autos. Riesgos: Inalacion de gases toxicos. Entre otros metodos de correccion, un metodo aceptable y factible para corregir este problema es remover el Generador Electrico del area.rico
6A0001
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $450 · Current $450
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: At A. Marrero Auto Glass warehouse area, it was observed that the area have lack of illumination. The illumination in the area was measures with a light meter GE DT-24878, the illumination in the area was 0 Footcandless. As established in the ANSI A-11.1-1973 all working areas must be properly illuminated. The employees were retreiving car windows. Hazard: Falls. Among other correction methods, a feasible and acceptable method to correct this hazard is fix the area illumination and restablish electric service in the area. En el almacen de A. Marrero Auto Glass, se observo que el area estaba falta de iluminacion. Se midio la iluminacion de area con un metro de luz GE DT-24878, la iluminacion en el area era de 0 "Footcandless". Como establecido en el ANSI A-11.1- 1973 todo los lugares de trabajo deben estar iluminados apropiadamente. Los empleados estaban buscando cristales de autos. Riesgo: Caidas. Entre otros metodos de correccion, un metodo factible y aceptable para corregir este problema es reparar la iluminacion en el area y restablecer el servicio electrico.r
6A0001
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $450 · Current $450
General-duty citation text
Section 6(a) of the Puerto Rico Occupational Safety and Health Act: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or physical harm to employees in that employees were exposed to: Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico: El patrono no proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten causando o que puedan causar muerte o dano fisico a los empleados, por cuanto empleados estaban expuestos a: At A. Marrero Auto Glass workshop, it was observed a window polishing machine without trademark defective, the water of the machine process leak into the machine electric motor. The employees were polishing car windows. Hazard: Electric Shocks. Among other correction method, a feasible and aceptable method to correct this hazard is repair the machine and seal the motor. En el taller de A. Marrero Auto Glass, Se observo una maquina sin marca de pulir cristales defectuosa, el agua del proceso de la maquina se filtraba al motor electrico de la misma. Los empleados estaban puliendo cristales de autos. Riesgo: Choques electricos. Entre otros metodos de correccion, un metodo factible y aceptable para corregir este problema es reparar la maquina y sellar el motor.
1910.22 A01
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $450 · Current $450
1910.22 A02
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $450 · Current $450
1910.157 E03
- Issued
- Dec 14, 2005
- Abate by
- Jan 11, 2006
- Penalty
- Initial $450 · Current $450
More inspections in this industry (NAICS 811122)
More inspections in PR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 307928069.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.