Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: M WARD MANUFACTURING CO., INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of M WARD MANUFACTURING CO., INC. in 2230 MAIN STREET, EVANSTON, IL 60202 (NAICS 336370). OSHA activity number 308003243.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch M Ward Manufacturing CO., INC. for free Get an email when a new federal OSHA severe-injury report for M Ward Manufacturing CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
2230 MAIN STREET
City
EVANSTON
State
IL
ZIP
60202
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (N)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336370
SIC code (legacy)
3465
Employees
31
Ownership type
Private (A)

11 citations on file for this inspection.

5(a)(1)

Serious Gravity 03 2 instances 4 exposed
Issued
Sep 7, 2004
Abate by
Oct 22, 2004
Penalty
Initial $875 · Current $481 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to:
(a) Tool Room, South End - The Johnson horizontal band saw, Company Number
55, was not
equipped with a magnetic restarter or similar device as prescribed by the
American National
Standard Institute for Metal Sawing Machines, ANSI B11.10-2003, Section
6.11, that in event
an interruption in the electrical supply, would prevent the saw from
restarting automatically
when power is restored. Employees last used the horizontal band saw on or
about August 5,
2004.
(b) Tool Room, West Wall - The Powermatic vertical band saw, Company
Number 54, was not
equipped with a magnetic restarter or similar device as prescribed by the
American
National
Standard Institute for Metal Sawing Machines, ANSI B11.10-2003, Section
6.11, that in event
an interruption in the electrical supply, would prevent the saw from
restarting automatically
when power is restored.  Employees last used the horizontal band saw on or
about August 5,
2004.
In accordance with 29 CFR 1903.19(d), abatement certification is required
for his violation
(using the CERTFICATION OF CORRECTIVE ACTION WORKSHEET, and in addition,
documentation demonstrating that abatement is complete must be included
with your
certification.  This documentation may include, but not limited to,
evidence of the purchase
or repair of the equipment, photographic or video evidence of abatement,
or other written
records.
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.147 C07 I

Serious Gravity 03 1 instance 23 exposed
Issued
Sep 7, 2004
Abate by
Oct 22, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.147 D04 I

Serious Gravity 03 1 instance 1 exposed
Issued
Sep 7, 2004
Abate by
Oct 22, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.178 P01

Serious Gravity 03 1 instance 2 exposed
Issued
Sep 7, 2004
Abate by
Sep 10, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.212 A01

Serious Gravity 05 7 instances 27 exposed
Issued
Sep 7, 2004
Abate by
Feb 21, 2005
Penalty
Initial $1,225 · Current $674 Reduced
Recent events (3)
  • · P (S) $673.75
  • · I (S) $673.75
  • · Z (S) $1225.00

1910.217 C02 IA

Serious Gravity 03 8 instances 23 exposed
Issued
Sep 7, 2004
Abate by
Feb 21, 2005
Penalty
Initial $875 · Current $481 Reduced
Recent events (3)
  • · P (S) $481.25
  • · I (S) $481.25
  • · Z (S) $875.00

1910.217 C02 III

Serious Gravity 03 1 instance 1 exposed
Issued
Sep 7, 2004
Abate by
Sep 23, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.217 D09 II

Serious Gravity 03 5 instances 2 exposed
Issued
Sep 7, 2004
Abate by
Sep 10, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.217 E01 II

Serious Gravity 03 5 instances 2 exposed
Issued
Sep 7, 2004
Abate by
Sep 10, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.303 G02 I

Serious Gravity 03 1 instance 2 exposed
Issued
Sep 7, 2004
Abate by
Sep 10, 2004
Penalty
Initial $875 · Current $481 Reduced
Recent events (2)
  • · I (S) $481.25
  • · Z (S) $875.00

1910.217 C03 IVD

Other-than-serious Gravity 01 1 instance 2 exposed
Issued
Sep 7, 2004
Abate by
Sep 10, 2004

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 308003243.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.