MOUNT PROSPECT,, IL ·
OSHA Inspection: U.S.A. FAB, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of U.S.A. FAB, INC. in 501 W. ALGONQUIN RD, UNIT B, MOUNT PROSPECT,, IL 60056 (NAICS 332312). OSHA activity number 308003292.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- U.S.A. FAB, INC.
- Site address
- 501 W. ALGONQUIN RD, UNIT B
- City
- MOUNT PROSPECT,
- State
- IL
- ZIP
- 60056
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- SIC code (legacy)
- 3441
- Employees
- 14
- Ownership type
- Private (A)
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the rotating blade: During setup and blade changes. a) Main Production Area-On or about 08/10/04, the Wells Metals horizontal bandsaw #8-M, was not equipped with a magnetic restarter or similar device, as prescribed by American National Standards Institute (ANSI) B11.10-2003, Section 6.11, that in the event of an interruption in the electrical supply such a device would prevent the saw from restarting automatically when power is restored. b) Main Production Area-On or about 08/10/04, the Wells Metals horizontal bandsaw #0- 1912A,was not equipped with a magnetic restarter or similar device, as prescribed by A National Standards Institute (ANSI) B11.10-2003, Section 6.11, that in the event interruption in the electrical supply such a device would prevent the saw from restarting automatically when power is restored. c)Main Production Area-On or about 08/10/04, the Kalamazoo vertical bandsaw #24-V-10, was not equipped with a magnetic restarter or similar device, as prescribed by A National Standards Institute (ANSI) B11.10-2003, Section 6.11, that in the event interruption in the electrical supply such a device would prevent the saw from restarting automatically when power is restored. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET),in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- · P (S) $450.00
- · I (S) $450.00
- · Z (S) $750.00
1910.147 C01
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (3)
- · P (S) $450.00
- · I (S) $450.00
- · Z (S) $750.00
1910.178 L01 I
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (3)
- · P (S) $450.00
- · I (S) $450.00
- · Z (S) $750.00
1910.212 A01
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (3)
- · P (S) $900.00
- · I (S) $900.00
- · Z (S) $1500.00
1910.212 A03 II
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (3)
- · P (S) $900.00
- · I (S) $900.00
- · Z (S) $1500.00
1910.215 A04
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (3)
- · P (S) $360.00
- · I (S) $360.00
- · Z (S) $600.00
1910.215 B09
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
Recent events (3)
- · P (S)
- · I (S)
- · Z (S)
1910.217 B04 I
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (3)
- · P (S) $900.00
- · I (S) $900.00
- · Z (S) $1500.00
1910.217 C01 I
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $1,500 · Current $900 Reduced
Recent events (3)
- · P (S) $900.00
- · I (S) $900.00
- · Z (S) $1500.00
1910.217 E01 I
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (3)
- · P (S) $450.00
- · I (S) $450.00
- · Z (S) $750.00
1910.217 E01 II
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
Recent events (3)
- · P (S)
- · I (S)
- · Z (S)
1910.219 B01
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $600 · Current $360 Reduced
Recent events (3)
- · P (S) $360.00
- · I (S) $360.00
- · Z (S) $600.00
1910.219 D01
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (3)
- · P (S) $450.00
- · I (S) $450.00
- · Z (S) $750.00
1910.219 E02 I
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
Recent events (3)
- · P (S)
- · I (S)
- · Z (S)
1904.4 A
- Issued
- Dec 1, 2004
- Abate by
- Jun 30, 2005
- Penalty
- Initial $300 · Current $180 Reduced
Recent events (3)
- · P (O) $180.00
- · I (O) $180.00
- · Z (O) $300.00
More inspections at U.S.A. FAB, INC.
View U.S.A. FAB, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 308003292.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.