Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: HANSON AGGREGATES/BMC INC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of HANSON AGGREGATES/BMC INC in 100 QUARRY LANE, LIGONIER, PA 15658 (NAICS 324121). OSHA activity number 308010800.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hanson Aggregates/Bmc INC for free Get an email when a new federal OSHA severe-injury report for Hanson Aggregates/Bmc INC is published. One employer, no account, unsubscribe in one click.
Site address
100 QUARRY LANE
City
LIGONIER
State
PA
ZIP
15658
Mailing
2200 SPRINGFIELD PIKE, CONNELLSVILLE, PA 15425
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (Y)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
324121
SIC code (legacy)
2951
Employees
4
Ownership type
Private (A)

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 02 1 instance 3 exposed
Issued
Mar 17, 2005
Abate by
Apr 19, 2005
Penalty
Initial $1,500 · Current $1,100 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not furnish employment
and a place of employment which were free from recognized hazards that
were causing or likely to cause
death or serious physical harm to employees in that employees were exposed
to being struck by falling objects
due to a hoist that was not inspected:
(a) Hanson Asphalt Plant, Ligonier PA:  On or about 3/2/05, the employer
did not develop a
preventative maintenance program for the chain fall hoist used at the
facility.  The hoist has not been
inspected on a regular basis.  The hook had been welded and modified to
accept a bolt.  In addition
the capacity of the hoist was not marked.
One acceptable means of abatement is to develop a preventative maintenance
program according to the
manufacturer's specifications.  In addition, conduct regular inspections
of the hoist and ensure that the
capacity of the hoist is marked.
Recent events (2)
  • · I (S) $1100.00
  • · Z (S) $1500.00

1910.22 A01

Serious Gravity 01 1 instance 4 exposed
Issued
Mar 17, 2005
Abate by
Apr 19, 2005
Penalty
Initial $1,125 · Current $950 Reduced
Recent events (2)
  • · I (S) $950.00
  • · Z (S) $1125.00

1910.147 C04 II

Serious Gravity 01 1 instance 4 exposed
Issued
Mar 17, 2005
Abate by
Apr 19, 2005
Penalty
Initial $1,125 · Current $950 Reduced
Recent events (2)
  • · I (S) $950.00
  • · Z (S) $1125.00

1910.1200 E01 I

Other-than-serious Gravity 01 1 instance 4 exposed
Issued
Mar 17, 2005
Abate by
Apr 19, 2005
Penalty
Initial $1,125 · Current $400 Reduced
Recent events (2)
  • · I (O) $400.00
  • · Z (S) $1125.00

1910.1200 F05 I

Other-than-serious Gravity 01 1 instance 4 exposed
Issued
Mar 17, 2005
Abate by
Apr 19, 2005
Recent events (2)
  • · I (O)
  • · Z (S)

1910.305 J07

Other-than-serious Gravity 01 1 instance 3 exposed
Issued
Mar 17, 2005
Abate by
Mar 21, 2005
Recent events (2)
  • · I (O)
  • · Z (O)

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 308010800.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.