Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: CHARLES JOHNSON LANDSCAPING & MAINTENANCE, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of CHARLES JOHNSON LANDSCAPING & MAINTENANCE, INC. in 3104 SOUTH DIXIE HWY, WEST PALM BEACH, FL 33222 (NAICS 541320). OSHA activity number 308406503.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Charles Johnson Landscaping & Maintenance, INC. — free Get an email when a new federal OSHA severe-injury report for Charles Johnson Landscaping & Maintenance, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3104 SOUTH DIXIE HWY
City
WEST PALM BEACH
State
FL
ZIP
33222
Mailing
PO BOX 935, PALM BEACH, FL 33480
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
541320
SIC code (legacy)
0781
Employees
2
Ownership type
A

3 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 28, 2005
Abate by
Oct 3, 2005
Penalty
Initial $3,500 · Current $2,625 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:
The employer did not furnish to each of his employees employment and a
place of employment
which were free from recognized hazards that were causing or were likely
to cause death or
serious physical harm to employees, in that employees were exposed to a
struck by hazard:
On or about 06/18/05, an employee who was operating a New Holland Skid
Steer loader was
not wearing a seat belt, and was exposed to the hazard of falling out of
and being struck by the
equipment.
Among other methods of abatement, a feasible and acceptable method to
correct this hazard is
to ensure employees are wearing the seat belt when operating the equipment.
PLEASE NOTE: DOCUMENTATION AND CERTIFICATION OF ABATEMENT IS NOT
REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $2625.00
  • — Z (S) $3500.00

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 28, 2005
Abate by
Oct 4, 2005
Penalty
Initial $4,900 · Current $3,675 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:
The employer did not furnish to each of his employees employment and a
place of employment
which were free from recognized hazards that were causing or were likely
to cause death or
serious physical harm to employees, in that employees were exposed to a
caught-in-between
hazard:
On or about 06/18/05, and on previous occasions, an employee was operating
a New Holland
Skid Steer Loader that had the side screens removed, exposing the employee
to the pinch point
created by the bucket arms and the loader frame.
Among other methods of abatement, a feasible and acceptable method to
correct this hazard is
for the employer to ensure all side screen guards are in place prior to
use.
PLEASE NOTE:  CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS
REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $3675.00
  • — Z (S) $4900.00

5(a)(1)

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 28, 2005
Abate by
Nov 16, 2005
Penalty
Initial $4,900 · Current $3,675 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:
The employer did not furnish to each of his employees employment and a
place of employment
which were free from recognized hazards that were causing or were likely
to cause death or
serious physical harm to employees, in that employees were exposed to a
struck-by hazard:
On or about 06/18/05, and on previous occasions, an employee was operating
a New Holland
Skid Steer Loader that had a damaged hydraulic hose, defective springs
that held the front end
loader bucket, and other machinery defects such as loose or damaged
controls.
Among other methods of abatement, a feasible and acceptable method to
correct this hazard is
for the employer to ensure the equipment is repaired according to the
manufacturer's
specification and ensure it is in safe operable condition.
PLEASE NOTE:  CERTIFICATION AND DOCUMENTATION OF ABATEMENT IS
REQUIRED FOR THIS VIOLATION.
Recent events (2)
  • — I (S) $3675.00
  • — Z (S) $4900.00

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 308406503.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.