CRESCENT CITY, FL —
OSHA Inspection: SPACE COAST TRUSS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SPACE COAST TRUSS, INC. in 105 DENVER ROAD, CRESCENT CITY, FL 32112 (NAICS 321214). OSHA activity number 308428598.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPACE COAST TRUSS, INC.
- Site address
- 105 DENVER ROAD
- City
- CRESCENT CITY
- State
- FL
- ZIP
- 32112
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- SIC code (legacy)
- 2439
- Employees
- 115
- Ownership type
- A
Citations
22 citations on file for this inspection.
5(a)(1)
- Issued
- May 20, 2005
- Abate by
- May 25, 2005
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation hazards associated with using saws that were not being inspected, and the saws had defects that shall have been corrected: a.On or about February 15, 2005, the "Speed Cut" radial arm saw fence had a 3 1/8 inch opening on the left hand side of the blade and a 6 13/16 inch opening on the left hand side of the blade, exposing employees to an amputation hazard due to the lack of material support when cutting short lengths of wood. Among other methods, one feasible and acceptable method to correct this hazard is to ensure that the saws are inspected at least every six months as in accordance with ANSI 01.1-1971. ABATEMENT CERTIFICATION IS NOT REQUIRED.TION
Recent events (2)
- — I (S) $2700.00
- — Z (S) $4500.00
1910.147 C01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.147 C05 I
- Issued
- May 20, 2005
- Abate by
- May 25, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $4,500 · Current $2,700 Reduced
Recent events (2)
- — I (S) $2700.00
- — Z (S) $4500.00
1910.213 F01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.213 F02
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.213 H01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $4,500 · Current $2,700 Reduced
Recent events (2)
- — I (S) $2700.00
- — Z (S) $4500.00
1910.213 H03
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.213 H04
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.213 R04
- Issued
- May 20, 2005
- Abate by
- May 25, 2005
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.215 A02
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.215 A04
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.215 B09
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.219 D01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
- Penalty
- Initial $2,250 · Current $1,350 Reduced
Recent events (2)
- — I (S) $1350.00
- — Z (S) $2250.00
1910.219 E01 I
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.219 F03
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (S)
- — Z (S)
1910.219 C04 I
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 E01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 G01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H01
- Issued
- May 20, 2005
- Abate by
- Jun 2, 2005
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Space Coast Truss, INC.
View Space Coast Truss, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321214)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 308428598.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.