BALTIMORE, MD —
OSHA Inspection: LENMAR INC
Accident-driven inspection · Health discipline
At a glance
On , OSHA opened an accident-driven health inspection of LENMAR INC in 4701 O'DONNELL STREET, BALTIMORE, MD 21224 (NAICS 325510). OSHA activity number 308721679.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LENMAR INC
- Site address
- 4701 O'DONNELL STREET
- City
- BALTIMORE
- State
- MD
- ZIP
- 21224
- Mailing
- 50 HOLT DRIVE, STONEY POINT, NY 10980
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325510
- SIC code (legacy)
- 2851
- Employees
- 60
- Ownership type
- A
Citations
28 citations on file for this inspection.
50104 A
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
- Penalty
- Initial $2,200 · Current $1,100 Reduced
General-duty citation text
Labor and Employment Article, Section 5-104(a): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: (a)Date of Violation:02/24/06 Location:Warehouse Equipment:AAF FABRI-Pulse Dust Collector Condition:A dust collector, used to collect explosive dust from the production area, was not designed by and installed under the supervision of qualified engineers knowledgeable of these systems and their associated hazards. Among other methods, one feasible and acceptable method to correct this hazard is to have a qualified engineer inspect the dust collector to ensure it is designed and installed in accordance with National Fire Protection Association (NFPA) 654, Standard for the Prevention of Fire and Dust Explosions From the Manufacturing, Processing and Handling of Combustible Particulate Solids; and if not, replace it or modify to meet standards.
Recent events (2)
- — I (S) $1100.00
- — Z (S) $2200.00
1910.23 A09
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
- Penalty
- Initial $1,650 · Current $800 Reduced
Recent events (2)
- — I (S) $800.00
- — Z (S) $1650.00
1910.106 E06 II
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
- Penalty
- Initial $825 · Current $400 Reduced
Recent events (2)
- — I (S) $400.00
- — Z (S) $825.00
1910.304 F04
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
- Penalty
- Initial $687 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $687.00
1910.307 B
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
- Penalty
- Initial $1,375 · Current $650 Reduced
Recent events (2)
- — I (S) $650.00
- — Z (S) $1375.00
1910.95 D01
- Issued
- Jun 9, 2006
- Abate by
- Jul 11, 2006
1910.106 E02 IIB2
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.107 B05 I
- Issued
- Jun 9, 2006
- Abate by
- Jul 11, 2006
1910.107 B06
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.107 B09
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.134 E05 I
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.134 F02
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.134 F05
- Issued
- Jun 9, 2006
- Abate by
- Jul 11, 2006
1910.134 G01 IA
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.134 G01 III
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.134 M02 I
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.178 M05 I
- Issued
- Jun 9, 2006
- Abate by
- Jul 11, 2006
1910.1200 F05 I
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.1200 F05 II
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.1020 G01 I
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.1020 G01 II
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.1020 G01 III
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
1910.1020 G02
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
50405 B02
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
50405 B03
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
50405 E
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
50406 A01
- Issued
- Jun 9, 2006
- Abate by
- Jun 26, 2006
09123302 A03
- Issued
- Jun 9, 2006
- Abate by
- Jun 14, 2006
More inspections at Lenmar INC
View Lenmar INC's full OSHA safety record →
More inspections in this industry (NAICS 325510)
More inspections in MD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 308721679.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.