CHESTER, SC ·
OSHA Inspection: LEX FRAMING, LLC
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of LEX FRAMING, LLC in 2624 SALUDA DRIVE, CHESTER, SC 29706 (NAICS 238130). OSHA activity number 309048841.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LEX FRAMING, LLC
- Site address
- 2624 SALUDA DRIVE
- City
- CHESTER
- State
- SC
- ZIP
- 29706
- Mailing
- PO BOX 44027, CHARLOTTE, NC 28215
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 7
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
8 citations on file for this inspection.
10012 A
- Issued
- Aug 5, 2005
- Abate by
- Aug 11, 2005
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
SCRR 71-112A: Failed to furnish a place of employment which is free of recognized hazards which may cause death or serious physical harm to his employees and comply with this regulation and other occupational safety and health rules and regulations promulgated under Chapter 15 of Title 41, Code of Laws, State of South Carolina, 1976, as amended, as follows: A. On or about June 21, 2005, employer knew or should have known that employees installing 24 metal plate connected wood trusses, in excess of 12 feet above floor level at church building, were exposed to the hazard of being struck by tresses toppling and falling to the floor due to only spacer blocks and sporadic lateral and cross bracing used as temporary bracing for the trusses. A feasible and useful method to correct this hazard, among other methods, is to obtain and follow the instructions and recommendations in the Commentary and Recommendations for Handling, Installing, and Bracing Metal Plate Connected Wood Trusses HIB-91 or equivalent. B. On or about June 21, 2005, employer knew or should have known that employees installing 24 metal plate connected wood trusses, in excess of 12 feet above floor and ground level at church building, were exposed to the hazard of being struck by truss components during possible failure of a truss to maintain its structural integrity due to each truss rigged and hoisted without utilization of a spreader bar and with the hoisting slings attached to the top cord of each truss at the wrong angle. A feasible and useful method to correct this hazard, among other methods, is to obtain and follow the instructions and recommendations in the Commentary and Recommendations for Handling, Installing, and Bracing Metal Plate Connected Wood Trusses HIB-91 or equivalent.
1926.20 B02
- Issued
- Aug 5, 2005
- Abate by
- Aug 11, 2005
- Penalty
- Initial $1,500 · Current $1,500
1926.21 B02
- Issued
- Aug 5, 2005
- Abate by
- Sep 7, 2005
- Penalty
- Initial $1,500 · Current $1,500
1926.50 C
- Issued
- Aug 5, 2005
- Abate by
- Sep 7, 2005
- Penalty
- Initial $375 · Current $375
1926.100 A
- Issued
- Aug 5, 2005
- Abate by
- Aug 11, 2005
- Penalty
- Initial $525 · Current $525
1926.501 B15
- Issued
- Aug 5, 2005
- Abate by
- Aug 11, 2005
- Penalty
- Initial $2,000 · Current $2,000
1926.503 A01
- Issued
- Aug 5, 2005
- Abate by
- Sep 7, 2005
- Penalty
- Initial $1,500 · Current $1,500
1926.503 A02
- Issued
- Aug 5, 2005
- Abate by
- Sep 7, 2005
- Penalty
- Initial $1,500 · Current $1,500
More inspections in this industry (NAICS 238130)
More inspections in SC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309048841.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.