ELK GROVE VILLAGE, IL —
OSHA Inspection: C M I NOVACAST, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C M I NOVACAST, INC. in 190 KELLY STREET, ELK GROVE VILLAGE, IL 60007 (NAICS 333298). OSHA activity number 309157865.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C M I NOVACAST, INC.
- Site address
- 190 KELLY STREET
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333298
- SIC code (legacy)
- 3559
- Employees
- 11
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 26, 2005
- Abate by
- Oct 15, 2005
- Penalty
- Initial $750 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation and laceration injuries: (a) Vertical Band Saw Area, West End - The Grob vertical band saw, used to cut metal, was not equipped with a magnetic restart or similar device. Among other methods, one feasible and acceptable method to correct this hazard includes but not limited to the following: Conform to ANSI an American National Standards Institute for Safety Requirements for Metal Sawing Machines B11.10-2003, Section 6.11 in that the machine controls shall incorporate a type of drive motor starter that will disconnect the drive motor from the power source in the event of control voltage or power system failure. Employees last used the saw on or about July 13, 2005. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation ( using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification . This documentation may include, but not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.147 C01
- Issued
- Jul 26, 2005
- Abate by
- Oct 15, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.178 L01 I
- Issued
- Jul 26, 2005
- Abate by
- Oct 15, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.212 A01
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
- Penalty
- Initial $1,050 · Current $630 Reduced
Recent events (2)
- — I (S) $630.00
- — Z (S) $1050.00
1910.213 B03
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.213 H01
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.215 B09
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
- Penalty
- Initial $450 · Current $270 Reduced
Recent events (2)
- — I (S) $270.00
- — Z (S) $450.00
1910.219 D01
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.219 E03 I
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
1910.303 B02
- Issued
- Jul 26, 2005
- Abate by
- Oct 15, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- Jul 26, 2005
- Abate by
- Oct 15, 2005
Recent events (2)
- — I (O)
- — Z (O)
1910.334 A02 II
- Issued
- Jul 26, 2005
- Abate by
- Aug 30, 2005
More inspections at C M I Novacast, INC.
View C M I Novacast, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333298)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309157865.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.