JONESBORO, AR —
OSHA Inspection: CONSTRUCTOR SERVICES, INC
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of CONSTRUCTOR SERVICES, INC in 300 E. HIGHLAND AVE., JONESBORO, AR 72401 (NAICS 238310). OSHA activity number 309222412.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONSTRUCTOR SERVICES, INC
- Site address
- 300 E. HIGHLAND AVE.
- City
- JONESBORO
- State
- AR
- ZIP
- 72401
- Mailing
- 3805 PRESIDENTIAL PARKWAY, STE.106, ATLANTA, GA 30340
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238310
- SIC code (legacy)
- 1742
- Employees
- 30
- Ownership type
- A
- Industry flags
- Construction safety.
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 17, 2006
- Abate by
- Jan 23, 2006
- Penalty
- Initial $2,500 · Current $2,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Construction site: The Terex Aerial Scissor Lift, serial number 99360123 with maintenance defects was not taken out of service until all maintenance defects were repaired or replaced, exposing employees to overturning of the lift. Among other methods, one feasible and acceptable abatement method to correct this hazard is: To comply with ANSI/SIA 92.6, paragraph 7.3, dated 1990. Aerial platforms that are not in proper operating condition shall be immediately removed from service until repaired.
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
5(a)(1)
- Issued
- Jan 17, 2006
- Abate by
- Feb 3, 2006
- Penalty
- Initial $2,500 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Construction Site: The Terex Aerial Scissor Lift, serial number 99360123 was not being operated by a fully qualified operator, exposing employees to overturning of the lift. Among other methods, one feasible and acceptable abatement methods to correct this hazard is: To comply with ANSI/SIA 92.6, paragraph 7.6 through 7.6.2, dated 1990. Insure the operator is fully trained in accordance with the manufacture's operating, maintenance manual and trained in the model of the aerial lift he/she will be operating and trainee records maintained by the user for at least three years.
Recent events (2)
- — I (O) $1500.00
- — Z (S) $2500.00
5(a)(1)
- Issued
- Jan 17, 2006
- Abate by
- Feb 3, 2006
- Penalty
- Initial $2,500 · Current $2,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Construction Site: The Terex Aerial Scissor Lift, serial number 99360123, operator could not read or understand the manufacture's operating instruction and user's safety rules printed version. Among other methods, one feasible and acceptable abatement methods to correct this hazard is: To comply with ANSI/SIA 92.6, paragraph 7.7(1) through 7.7(4), insure the operator has been instructed by a qualified person in the intended purpose and function of each control, read and understand the manufacturer's operating instruction and user's safety rules.
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
5(a)(1)
- Issued
- Jan 17, 2006
- Abate by
- Jan 23, 2006
- Penalty
- Initial $2,500 · Current $2,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Construction Site: The Terex Aerial Scissor Lift, serial number 99360123, areas where the scissor lift was used were not inspected for drop-offs or holes, bumps, and floor obstruction before being used in such areas, exposing employees to overturning of the lift. Among other methods, one feasible and acceptable abatement method to correct the hazard is: To comply with ANSI/SIA 92.6, paragraph 7.8(1) through 7.8(9). Before the aerial platform is used and during use, the user shall check the area in which the aerial platform is to be used for possible hazards such as, but not limited to: drop-offs, holes, bumps, floor obstruction, debris, and other possible unsafe conditions.
Recent events (2)
- — I (S) $2500.00
- — Z (S) $2500.00
More inspections at Constructor Services, INC
View Constructor Services, INC's full OSHA safety record →
More inspections in this industry (NAICS 238310)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309222412.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.