ERIE, PA ·
OSHA Inspection: A. DUCHINI, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A. DUCHINI, INC. in 2550 MCKINLEY AVENUE, ERIE, PA 16503 (NAICS 327331). OSHA activity number 309336972.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A. DUCHINI, INC.
- Site address
- 2550 MCKINLEY AVENUE
- City
- ERIE
- State
- PA
- ZIP
- 16503
- Mailing
- PO BOX 10005, ERIE, PA 16514
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Union (Y)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327331
- SIC code (legacy)
- 3271
- Employees
- 50
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
28 citations on file for this inspection.
5(a)(1)
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards associated with using a support that may not lift the rated capacity of the hoist: a)New Building - On or about January 30, 2007, employees of the company were using a 3 ton hoist to move forms to and from a Concrete Block Machine. Support arm for hoist, was only rated for 1 ton. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD OF ABATEMENT WOULD BE TO FOLLOW THE RECOMMENDATIONS OUTLINED IN ASME B30.16-2003, "OVERHEAD HOISTS (UNDERHUNG)". UNDER SECTION 16- 1.3.2 SUPPORT, IT STATES "THE SUPPORTING STRUCTURE, INCLUDING TROLLEYS, MONORAIL, OR CRANE, SHALL BE DESIGNED TO WITHSTAND THE LOADS AND FORCES IMPOSED BY THE HOIST FOR THE RATED LOAD."
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
5(a)(1)
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to empoyees in that employees were exposed to operating an overhead hoist without control buttons marked as to which direction they controlled: a)New Plant Area - On or about January 30, 2007, employees of the company were using a hoist that did not have its pendant controls marked as to which direction control buttons would make hook travel. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD OF ABATEMENT WOULD BE TO FOLLOW THE RECOMMENDATIONS OUTLINED IN ASME B30.16-2003, "OVERHEAD HOISTS (UNDERHUNG)". UNDER SECTION 16- 1.1.2 CONTROLS, IT STATES "EACH CONTROL ACTUATOR OF AN ELECTRIC OR AIR POWERED HOIST SHALL BE MARKED TO INDICATE THE DIRECTION OF RESULTANT MOTION."
5(a)(1)
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards associated with using an overhead hoist that was not functioning correctly due to lack of inspections on hoists: a)New Building - On or about April 24, 2007, employees of the company were using a 3 ton overhead hoist to move forms to and from a Concrete Block Machine. When lowering a load with the hoist, load would continue in the downward motion after downward button on control was released. Upward button on control had to be pressed to stop downward motion or load would continue all the way to the floor. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD OF ABATEMENT WOULD BE TO FOLLOW THE RECOMMENDATIONS OUTLINED IN ASME B30.16-2003, "OVERHEAD HOISTS (UNDERHUNG)". UNDER SECTIONS 16- 2.1.2, FREQUENT INSPECTION, PARAGRAPH (C), STATES THAT "THE FOLLOWING ITEMS SHALL BE INSPECTED: (3) HOIST BRAKING SYSTEM FOR PROPER OPERATION."
1910.23 C01
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.23 D01 III
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.36 D01
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.37 A03
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.37 B02
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.106 E02 III
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.253 B04 III
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.146 D06
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.146 E01
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.147 D04 I
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.147 C04 I
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.147 C06 I
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.184 C01
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.184 E05
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.212 A01
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
- Penalty
- Initial $2,500 · Current $1,300 Reduced
Recent events (2)
- · I (S) $1300.00
- · Z (S) $2500.00
1910.212 A03 II
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.219 D01
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.219 E03 I
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.219 F03
- Issued
- May 17, 2007
- Abate by
- Jun 30, 2007
Recent events (2)
- · I (S)
- · Z (S)
1910.303 G02 I
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $875 · Current $570 Reduced
Recent events (2)
- · I (S) $570.00
- · Z (S) $875.00
1910.303 G01
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.305 G01 III
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.1200 F05 I
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
- Penalty
- Initial $525 · Current $570
Recent events (2)
- · I (S) $570.00
- · Z (S) $525.00
1910.1200 F05 II
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
1910.24 B
- Issued
- May 17, 2007
- Abate by
- Jun 4, 2007
Recent events (2)
- · I (O)
- · Z (O)
More inspections at A. Duchini, INC.
View A. Duchini, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327331)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 309336972.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.