NEW CASTLE, PA —
OSHA Inspection: KEYSTONE INDUSTRIES WINDOW & SCREEN SYSTEMS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of KEYSTONE INDUSTRIES WINDOW & SCREEN SYSTEMS, INC. in 105 MAHONING AVENUE, NEW CASTLE, PA 16102 (NAICS 332321). OSHA activity number 309341394.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KEYSTONE INDUSTRIES WINDOW & SCREEN SYSTEMS, INC.
- Site address
- 105 MAHONING AVENUE
- City
- NEW CASTLE
- State
- PA
- ZIP
- 16102
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332321
- SIC code (legacy)
- 3442
- Employees
- 75
- Ownership type
- A
Citations
19 citations on file for this inspection.
5(a)(1)
- Issued
- Jun 19, 2008
- Abate by
- Oct 1, 2008
- Penalty
- Initial $875 · Current $500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to potential fire hazards due to the presence of aluminum chips, dust, and turnings throughout the production areas.: a.) Keystone Industries Window & Screen Systems, Inc., 105 Mahoning Ave., New Castle, PA 16102 - Company employees conducted sawing, milling and machining operations on aluminum and aluminum alloys during production operations for the manufacturing of company products. The processing and finishing operations generated aluminum chips, dusts, flakes, shavings, and turnings. Open top cardboard gaylord boxes were used to accumulate and store aluminum chips, dusts, flakes, shavings, and turnings which were emptied from dust collectors and swept up from the floor around other production equipment periodically. On or about 4/28/08 and 5/7/08, the accumulation of aluminum chips, dusts, flakes, shavings, and turnings was present on the floors of the production areas, on and around electrical equipment, and on and around dust collecting equipment. Combustibility and Explosibility tests had not been conducted in accordance with National Fire Protection Association (NFPA) 484 Standard for Combustible Metals. Without conducting required testing, the Company could not ensure that safe work practices and emergency response preparedness were complaint with NFPA 484. FEASIBLE ABATEMENT METHODS: Among other methods, feasible and acceptable methods to correct the condition include: 1.Collect representative samples of aluminum chips, dust, and turnings and have Combustibility and Explosibility tests conducted per NFPA 484, Chapter 4 Determination of the Combustibility or Explosivity of a Metal, Metal Powder, or Metal Dust. 2.Refer to NFPA 484 Chapter 6 Aluminum and NFPA 484 Chapter 13 Fire Prevention, Fire Protection, and Emergency Response for compliance guidance. 3.Provide the Erie Area OSHA Office with the results of the tests.
Recent events (2)
- — I (S) $500.00
- — Z (S) $875.00
1910.22 A01
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
- Penalty
- Initial $700 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $700.00
1910.95 C01
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
- Penalty
- Initial $700 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $700.00
1910.95 G01
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
1910.95 I02 IIA
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
1910.95 K01
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
1910.95 D01
- Issued
- Jun 19, 2008
- Abate by
- Jun 24, 2008
1910.157 D06
- Issued
- Jun 19, 2008
- Abate by
- Oct 1, 2008
- Penalty
- Initial $700 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $700.00
1910.157 C01
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
1910.157 E02
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
1910.157 G01
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
1910.217 C02 IA
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
- Penalty
- Initial $700 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $700.00
1910.217 B04 I
- Issued
- Jun 19, 2008
- Abate by
- Jun 24, 2008
1910.217 F02
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
1910.212 A02
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
1910.217 E01 I
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
- Penalty
- Initial $700 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $700.00
1910.217 E01 II
- Issued
- Jun 19, 2008
- Abate by
- Jul 9, 2008
1910.38 B
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
1910.39 B
- Issued
- Jun 19, 2008
- Abate by
- Jul 23, 2008
More inspections at Keystone Industries Window & Screen Systems, INC.
View Keystone Industries Window & Screen Systems, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332321)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309341394.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.