HENDERSONVILLE, NC —
OSHA Inspection: QUALITY RUBBER MFG. CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of QUALITY RUBBER MFG. CO., INC. in 2510 INDUSTRIAL PARK ROAD, HENDERSONVILLE, NC 28793 (NAICS 326299). OSHA activity number 309520088.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY RUBBER MFG. CO., INC.
- Site address
- 2510 INDUSTRIAL PARK ROAD
- City
- HENDERSONVILLE
- State
- NC
- ZIP
- 28793
- Mailing
- PO BOX 709, HENDERSONVILLE, NC 28793
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326299
- SIC code (legacy)
- 3069
- Employees
- 46
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
7 citations on file for this inspection.
95012901
- Issued
- Dec 5, 2005
- Abate by
- Jan 9, 2006
- Penalty
- Initial $500 · Current $238 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: REF: ANSI B30-1998, 11-2.2.2 Load Test Note:Among other methods, one feasible and acceptable abatement method to correct this hazard is to ensure that the monorails are loaf tested. (a) Press Area - Monorails throughout the press area had not been load tested.out
Recent events (2)
- — I (S) $237.50
- — Z (S) $500.00
95012901
- Issued
- Dec 5, 2005
- Abate by
- Jan 9, 2006
- Penalty
- Initial $500 · Current $238 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: REF: ANSI B30-1998 11-2.1.1 Inspection Note:Among other methods, one feasible and acceptable abatement method to correct this hazard is to ensure that the monorails are inspected frequently and periodically. (a) Press area - Presses were not being inspected frequently and periodically.
Recent events (2)
- — I (S) $237.50
- — Z (S) $500.00
1910.151 C
- Issued
- Dec 5, 2005
- Abate by
- Jan 9, 2006
- Penalty
- Initial $150 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $150.00
1910.23 A09
- Issued
- Dec 5, 2005
- Abate by
- Dec 15, 2005
1910.212 B
- Issued
- Dec 5, 2005
- Abate by
- Dec 15, 2005
1910.304 A02
- Issued
- Dec 5, 2005
- Abate by
- Dec 22, 2005
1910.1200 F05 I
- Issued
- Dec 5, 2005
- Abate by
- Dec 22, 2005
More inspections at Quality Rubber MFG. CO., INC.
View Quality Rubber MFG. CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326299)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309520088.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.