GURNEE, IL —
OSHA Inspection: KHM PLASTICS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KHM PLASTICS, INC. in 4090 RYAN ROAD SUITE B, GURNEE, IL 60031 (NAICS 337215). OSHA activity number 309590644.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KHM PLASTICS, INC.
- Site address
- 4090 RYAN ROAD SUITE B
- City
- GURNEE
- State
- IL
- ZIP
- 60031
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- SIC code (legacy)
- 2542
- Employees
- 30
- Ownership type
- A
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
- Penalty
- Initial $1,125 · Current $450 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: (a) Production Department, East Wall - The Sears Craftsman vertical band saw, used to cut plastic parts was not equipped with a magnetic restart or similar device. The saw was used last on or about November 1, 2005. (b) Production Department, South Wall - The Rockwell Tiltin cross cut circular table saw, Serial Number 1795574, was not equipped with a magnetic restart or similar device. The saw was last used on or about December 14, 2005. Among other methods, one feasible and acceptable method to correct this hazard includes but not limited to the following: NFPA a National Fire Protection Association Electrical Standard for Industrial Machinery NFPA 79 - 2002, Section 7.5.3. Upon restoration of the voltage or upon switching on the incoming supply, automatic or unintentional restarting of the machine shall be prevented when such a restart can cause a hazardous condition. No abatement certification or documentation is required for this item.
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.147 C06 I
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
- Penalty
- Initial $1,125 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.147 C07 IB
- Issued
- Jan 11, 2006
- Abate by
- Feb 15, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
- Penalty
- Initial $1,125 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.219 D01
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
- Penalty
- Initial $1,125 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.219 E03 I
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.303 A
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
- Penalty
- Initial $1,125 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $1125.00
1910.212 A03 II
- Issued
- Jan 11, 2006
- Abate by
- Feb 15, 2006
- Penalty
- Initial $3,000 · Current $600 Reduced
Recent events (2)
- — I (S) $600.00
- — Z (R) $3000.00
1910.147 C07 IV
- Issued
- Jan 11, 2006
- Abate by
- Feb 15, 2006
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 II
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- Jan 11, 2006
- Abate by
- Jan 17, 2006
Recent events (2)
- — I (O)
- — Z (O)
More inspections at KHM Plastics, INC.
View KHM Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309590644.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.