SUWANEE, GA —
OSHA Inspection: KITCHEN CONCEPTS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of KITCHEN CONCEPTS, LLC in 3645 BURNETTE PARK DR, SUWANEE, GA 30024 (NAICS 337110). OSHA activity number 309617991.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KITCHEN CONCEPTS, LLC
- Site address
- 3645 BURNETTE PARK DR
- City
- SUWANEE
- State
- GA
- ZIP
- 30024
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- SIC code (legacy)
- 2434
- Employees
- 9
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 7, 2006
- Abate by
- Sep 11, 2006
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards associated with the transportation of compressed air in PVC: On or about June 13, 2006: (a)Employees throughout the facility are exposed to hazards associated with the use of PVC to transport compressed air above ground. Employees use compressed air to power equipment and tool and for cleaning purposes. ABATEMENT NOTE: A feasible and acceptable method of abatement to correct the hazard, as recommended by the Plastic Pipe Institute would be to bury the pipe, encased in shatter resistant material, or replaced with metal (copper, iron) pipe or ABS type plastic pipe. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
1910.23 C01
- Issued
- Aug 7, 2006
- Abate by
- Aug 31, 2006
- Penalty
- Initial $450 · Current $450
1910.37 A03
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $450 · Current $450
1910.37 B02
- Issued
- Aug 7, 2006
- Abate by
- Aug 17, 2006
1910.147 C01
- Issued
- Aug 7, 2006
- Abate by
- Sep 22, 2006
- Penalty
- Initial $1,500 · Current $1,500
1910.147 C04 I
- Issued
- Aug 7, 2006
- Abate by
- Sep 22, 2006
1910.147 C07 I
- Issued
- Aug 7, 2006
- Abate by
- Sep 22, 2006
1910.212 A01
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $600 · Current $600
1910.213 D01
- Issued
- Aug 7, 2006
- Abate by
- Aug 17, 2006
- Penalty
- Initial $750 · Current $750
1910.213 H01
- Issued
- Aug 7, 2006
- Abate by
- Aug 17, 2006
- Penalty
- Initial $750 · Current $750
1910.213 I01
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
1910.242 B
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $750 · Current $750
1910.303 B02
- Issued
- Aug 7, 2006
- Abate by
- Aug 17, 2006
- Penalty
- Initial $450 · Current $450
1910.305 A01 I
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $750 · Current $750
1910.305 B01
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $1,500 · Current $1,500
1910.305 B02
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $750 · Current $750
1910.305 G01 IIIA
- Issued
- Aug 7, 2006
- Abate by
- Aug 31, 2006
- Penalty
- Initial $1,500 · Current $1,500
1910.305 G02 III
- Issued
- Aug 7, 2006
- Abate by
- Aug 10, 2006
- Penalty
- Initial $750 · Current $750
More inspections at Kitchen Concepts, LLC
View Kitchen Concepts, LLC's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309617991.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.