LAWRENCEVILLE, GA —
OSHA Inspection: TARA MATERIALS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TARA MATERIALS, INC. in 322 INDUSTRIAL PARK DRIVE, LAWRENCEVILLE, GA 30046 (NAICS 339999). OSHA activity number 309619419.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TARA MATERIALS, INC.
- Site address
- 322 INDUSTRIAL PARK DRIVE
- City
- LAWRENCEVILLE
- State
- GA
- ZIP
- 30046
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- SIC code (legacy)
- 3999
- Employees
- 234
- Ownership type
- A
Citations
7 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 5, 2006
- Abate by
- Nov 1, 2006
- Penalty
- Initial $1,500 · Current $1,000 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to spreader bars that were not weight rated or inspected for wear and/or damage. The hazard is recognized and addressed in ASME B30.20-1993. A.) On or about 8/23/06, in various areas of the facility employees are exposed to foot and hand hazards as hoists are equipped with spreader bars that have not been weight rated or inspected for wear and/or damage. There was evidence of wear/damage on one of the bars inspected. There was a feasible and useful method to correct the hazard: Some methods, include, but are not limited to: Rating the spreader bars capacity as to each units' weight limit and inspecting the spreader bars for evidence of wear or damage. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1500.00
1910.22 B01
- Issued
- Oct 5, 2006
- Abate by
- Dec 15, 2006
- Penalty
- Initial $1,500 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1500.00
1910.23 A08 II
- Issued
- Oct 5, 2006
- Abate by
- Dec 15, 2006
1910.179 J02 III
- Issued
- Oct 5, 2006
- Abate by
- Nov 1, 2006
- Penalty
- Initial $2,625 · Current $1,800 Reduced
Recent events (2)
- — I (S) $1800.00
- — Z (S) $2625.00
1910.179 J02 IV
- Issued
- Oct 5, 2006
- Abate by
- Nov 1, 2006
1910.303 B01 I
- Issued
- Oct 5, 2006
- Abate by
- Oct 5, 2006
- Penalty
- Initial $1,125 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1125.00
1910.305 G01 IIIA
- Issued
- Oct 5, 2006
- Abate by
- Oct 5, 2006
More inspections at Tara Materials, INC.
View Tara Materials, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339999)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309619419.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.