MADISON, GA —
OSHA Inspection: BRODIE WILLIAMS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BRODIE WILLIAMS in 2081 EATONTON HIGHWAY, MADISON, GA 30650 (NAICS 238140). OSHA activity number 309623809.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BRODIE WILLIAMS
- Site address
- 2081 EATONTON HIGHWAY
- City
- MADISON
- State
- GA
- ZIP
- 30650
- Mailing
- 4113 SEVEN ISLANDS ROAD, MADISON, GA 30650
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- SIC code (legacy)
- 1741
- Employees
- 9
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $1,500 · Current $1,500
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards. On or about 03/27/07 at Madison, GA: An Employee was exposed to fall hazards, while performing masonry work at a construction site. The employee was standing on the forks of a rough terrain forklift and lifted to a height of approximately 31 feet above the ground. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS: 1. Reference: ANSI Standard B56.6. The employer should prohibit operators of rough terrain forklifts from allowing employees to ride the forks. Supervisors should provide a proper means for employees to access working levels. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
1910.178 L04 III
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $600 · Current $600
1910.178 L06
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
1926.20 B01
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $600 · Current $600
1926.451 B01
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $1,500 · Current $1,500
1926.451 C02
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $750 · Current $750
1926.452 C02
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
1926.451 F07
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $1,050 · Current $1,050
1926.454 C03
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
1926.451 G01
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $1,500 · Current $1,500
1926.451 H01
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
- Penalty
- Initial $600 · Current $600
1926.451 H02 II
- Issued
- Apr 20, 2007
- Abate by
- May 16, 2007
More inspections in this industry (NAICS 238140)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309623809.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.