RAYTOWN, MO —
OSHA Inspection: SHAMROCK CABINETS & FIXTURES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SHAMROCK CABINETS & FIXTURES in 10201 EAST 65TH STREET, RAYTOWN, MO 64133 (NAICS 337110). OSHA activity number 309704138.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHAMROCK CABINETS & FIXTURES
- Site address
- 10201 EAST 65TH STREET
- City
- RAYTOWN
- State
- MO
- ZIP
- 64133
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- SIC code (legacy)
- 2434
- Employees
- 197
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- May 26, 2006
- Abate by
- Jun 8, 2006
- Penalty
- Initial $1,400 · Current $700 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards of polyvinyl chloride (PVC) plastic pipe rupturing or exploding that was used as a pressure air line distribution system throughout the cabinet finish area: (a)On or about March 23, 2006, regular polyvinyl chloride (PVC) pipes were used for the transportation of compressed air in the cabinet finish building. While ultimate responsibility for correcting the hazard rests with the employer, given his/her superior knowledge of the work place, feasible and acceptable methods to correct this hazard among others, include, but are not limited to: (1)Install black iron piping for the air distribution system; (2)Completely enclose all above ground portions of the plastic service in a shatter resistant conduit or casing of sufficient strength to provide protection from external damage and deterioration; and (3)Install approved impact resistant ABS (acrylonitrile-butadiene-styrene) pipe. Sections 842.32, 842.43, and 849.52(b) of the American National Standards Institute / American Society of Mechanical Engineers (ANSI?ASME B31.8-1986, Gas Transmission and Distribution Piping Systems Standard, limit the operating pressure of plastic piping distribution systems to 100 pounds per inch (psi) and prohibit the installation of such systems above ground except where "...the above ground portion of the plastic service line is completely enclosed in a conduit or casing sufficient strength to provide protection from external damage and deterioration." Abatement certification is required for this item - use the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET for this purpose.
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.212 A05
- Issued
- May 26, 2006
- Abate by
- Jun 7, 2006
- Penalty
- Initial $1,400 · Current $700 Reduced
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.304 A02
- Issued
- May 26, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $1,050 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $1050.00
1910.23 A02
- Issued
- May 26, 2006
- Abate by
- Jun 8, 2006
- Penalty
- Initial $1,400 · Current $700 Reduced
Recent events (2)
- — I (S) $700.00
- — Z (S) $1400.00
1910.303 F
- Issued
- May 26, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Shamrock Cabinets & Fixtures
View Shamrock Cabinets & Fixtures's full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309704138.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.