SEDALIA, MO ·
OSHA Inspection: SEDALIA STEEL SUPPLY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SEDALIA STEEL SUPPLY, INC. in 1900 RISSLER RD, SEDALIA, MO 65301 (NAICS 423510). OSHA activity number 309704534.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SEDALIA STEEL SUPPLY, INC.
- Site address
- 1900 RISSLER RD
- City
- SEDALIA
- State
- MO
- ZIP
- 65301
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- SIC code (legacy)
- 5051
- Employees
- 36
- Ownership type
- Private (A)
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $2,500 · Current $1,000 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck-by and crushing hazards: Employees performing daily operations while working in material shipping/receiving, staging and CNC areas were exposed to hazards associated with struck-by and crushing. Plate hooks were made in-house and used for lifting of steel plate ranging in size of 8 feet wide x 20 feet long (approximately 3200 pounds) to 8 feet wide x 40 feet long (approximately 6400 pounds) without being load rated. inspected or tested. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD TO CORRECT THIS HAZARD IS: a) Comply with ASME/ANSI B30.20 "Below the Hook Lifting Devices" and ASME/ANSI B30.10 "Hooks"; 1) Provide rated load on any custom-made lifting device. 2) Provide initial, frequent and periodic inspection of the lifting devices. 3) Ensure that initial proof testing of 125of the rated load was conducted. b) Implement a thorough schedule preventative maintenance program as well as pre-lift inspections and tests as prescribed by the ANSI/ALI ALOIM-2000. Abatement Note: Abatement certification is required for this item using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET.
Recent events (2)
- · F (S) $1000.00
- · Z (S) $2500.00
1910.132 A
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $1,000 · Current $200 Reduced
Recent events (2)
- · F (S) $200.00
- · Z (S) $1000.00
1910.151 C
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $750 · Current $200 Reduced
Recent events (2)
- · F (S) $200.00
- · Z (S) $750.00
1910.184 C02
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $1,750 · Current $500 Reduced
Recent events (2)
- · F (S) $500.00
- · Z (S) $1750.00
1910.184 C07
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
Recent events (2)
- · F (S)
- · Z (S)
1910.184 D
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $1,000 · Current $200 Reduced
Recent events (2)
- · F (S) $200.00
- · Z (S) $1000.00
1910.184 E07 I
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
Recent events (2)
- · F (S)
- · Z (S)
1910.212 A03 II
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $2,500 · Current $1,000 Reduced
Recent events (2)
- · F (S) $1000.00
- · Z (S) $2500.00
1910.215 A04
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $1,000 · Current $400 Reduced
Recent events (2)
- · F (S) $400.00
- · Z (S) $1000.00
1910.215 B09
- Issued
- Aug 22, 2006
- Abate by
- Oct 10, 2006
Recent events (2)
- · F (S)
- · Z (S)
1910.303 C
- Issued
- Aug 22, 2006
- Abate by
- Feb 16, 2007
- Penalty
- Initial $750 · Current $250 Reduced
Recent events (2)
- · F (S) $250.00
- · Z (S) $750.00
1910.305 B01
- Issued
- Aug 22, 2006
- Abate by
- Dec 11, 2006
- Penalty
- Initial $750 · Current $250 Reduced
Recent events (2)
- · F (S) $250.00
- · Z (S) $750.00
More inspections at Sedalia Steel Supply, INC.
View Sedalia Steel Supply, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423510)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 309704534.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.