GOLDSBORO, NC —
OSHA Inspection: TURNER EQUIPMENT COMPANY
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of TURNER EQUIPMENT COMPANY in 1500 US HWY 117 SOUTH, GOLDSBORO, NC 27530 (NAICS 332420). OSHA activity number 309747459.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TURNER EQUIPMENT COMPANY
- Site address
- 1500 US HWY 117 SOUTH
- City
- GOLDSBORO
- State
- NC
- ZIP
- 27530
- Mailing
- P. O. BOX 1260, GOLDSBORO, NC 27533
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332420
- SIC code (legacy)
- 3443
- Employees
- 32
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
18 citations on file for this inspection.
1910.333 A
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $2,100 · Current $1,365 Reduced
Recent events (2)
- — I (S) $1365.00
- — Z (S) $2100.00
1910.22 A02
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (S)
- — Z (S)
95012901
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $175 · Current $100 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a)tank manufacturing area, cleaning area - for the "Budget" 1 ton underhung hoist that was labeled "1 ton" on its I beam, but labeled "2 ton" on its hoist and block. b)tank manufacturing area, cleaning area - for the "Budget" 1 ton underhung hoist that was not inspected in the past year. c)tank manufacturing area, cleaning area - for the "Budget" 1 ton underhung hoist that was not load rated to determine its load capacity. d)tank manufacturing area, cleaning area - for the "Gorbel" 2 ton underhung hoist that had an unlabeled hoist and block. e)tank manufacturing area, cleaning area - for the "Gorbel" 2 ton underhung hoist that was not inspected in the past year. f)tank manufacturing area, cleaning area - for the "Gorbel" 2 ton underhung hoist that was not load rated to determine its load capacity. g)tank manufacturing area, cleaning area - for the "Dayton" 2 ton underhung hoist that had its block labeled "5 ton". h)tank manufacturing area, cleaning area - for the "Dayton" 2 ton underhung hoist that was not inspected in the past year. i)tank manufacturing area, cleaning area - for the "Dayton" 2 ton underhung hoist that was not load rated to determine its load capacity. j)tank manufacturing area, cleaning area - for the "Coffing" 1 ton underhung hoist that was not inspected in the past year. k)tank manufacturing area, cleaning area - for the "Coffing" 1 ton underhung hoist that was not load rated to determine its load capacity. l)tank manufacturing area, shipping and receiving - for the 1 ton portable crane that was not inspected in the past year. m)tank manufacturing area, shipping and receiving - for the 1 ton portable crane that was not load rated to determine its load capacity.
Recent events (2)
- — I (S) $100.00
- — Z (S) $175.00
1910.107 G02
- Issued
- Jun 1, 2006
- Abate by
- Aug 25, 2006
- Penalty
- Initial $125 · Current $100 Reduced
Recent events (3)
- — P (S) $100.00
- — I (S) $100.00
- — Z (S) $125.00
1910.107 B05 I
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A03 II
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $125 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $125.00
1910.212 A01
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $125 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $125.00
1910.215 B09
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $125 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $125.00
1910.215 A04
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.219 F03
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $125 · Current $100 Reduced
Recent events (2)
- — I (S) $100.00
- — Z (S) $125.00
1910.147 C07 I
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
- Penalty
- Initial $88 · Current $88
Recent events (2)
- — I (S) $88.00
- — Z (S) $88.00
1910.147 C06 I
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C04 II
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
Recent events (2)
- — I (S)
- — Z (S)
1910.134 E01
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
1910.134 H01
- Issued
- Jun 1, 2006
- Abate by
- Jul 19, 2006
1910.157 G01
- Issued
- Jun 1, 2006
- Abate by
- Jul 19, 2006
1910.22 D01
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
1910.303 F
- Issued
- Jun 1, 2006
- Abate by
- Jun 6, 2006
More inspections at Turner Equipment Company
View Turner Equipment Company's full OSHA safety record →
More inspections in this industry (NAICS 332420)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309747459.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.