ORANGE, NJ — 2006-05-09 00:00:00

OSHA Inspection: TRYCO TOOL & MANUFACTURING CO.

Planned inspection · Safety discipline

At a glance

On 2006-05-09 00:00:00, OSHA opened a planned safety inspection of TRYCO TOOL & MANUFACTURING CO. in 363 S. JEFFERSON STREET, ORANGE, NJ 07050 (NAICS 332116). OSHA activity number 309779866.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Tryco Tool & Manufacturing CO. — free Get an email when a new federal OSHA severe-injury report for Tryco Tool & Manufacturing CO. is published. One employer, no account, unsubscribe in one click.

Where did this inspection happen?

Establishment: TRYCO TOOL & MANUFACTURING CO.
Site address: 363 S. JEFFERSON STREET
City: ORANGE
State: NJ
ZIP: 07050

What kind of inspection was it?

Inspection type: Planned (H)
Scope: Partial (B)
Discipline: Safety
Advance notice: No
Union status: Y

When did the case open and close?

Opened: 2006-05-09 00:00:00
Closing conference: 2006-05-18 00:00:00
Case closed: 2006-12-15 00:00:00
Last modified: 2006-12-15 00:00:00
Data loaded: 2011-10-14 16:38:47

Establishment context

NAICS code: 332116
SIC code (legacy): 3469
Employees: 53
Ownership type: A

Citations

12 citations on file for this inspection.

5(a)(1)

Serious Gravity 02 4 instances 4 exposed

Issued: Aug 1, 2006
Abate by: Aug 25, 2006
Penalty: Initial $900 · Current $450 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to crushing hazard:
a)Tool room, adjacent to the safety clean trough - Employees used the
pendant control, for the crane having the #2 Budgit 1/2 ton hoist as a
component, which was not marked indicating the functions of the buttons.
Violation was observed on or about 05/09/06
Among other methods, one feasible and acceptable abatement method to
correct
this hazard is to follow the requirements of ANSI B30.16-1967, Section
16-1.1.2
Controls, which states "Each control actuator of an electric- or
air-powered hoist
shall be marked to indicate the direction of resultant motion."t

Recent events (2)

2006-11-29 00:00:00 — F (S) $450.00
2006-08-01 00:00:00 — Z (S) $900.00

1910.179 J02 I

Serious Gravity 02 4 instances 5 exposed

Issued: Aug 1, 2006
Abate by: Aug 7, 2006

Recent events (2)

2006-11-29 00:00:00 — F (S)
2006-08-01 00:00:00 — Z (S)

1910.179 J02 IV

Serious Gravity 02 4 instances 5 exposed

Issued: Aug 1, 2006
Abate by: Aug 7, 2006

Recent events (2)

2006-11-29 00:00:00 — F (S)
2006-08-01 00:00:00 — Z (S)

1910.179 J02 III

Serious Gravity 02 4 instances 5 exposed

Issued: Aug 1, 2006
Abate by: Aug 7, 2006

Recent events (2)

2006-11-29 00:00:00 — F (S)
2006-08-01 00:00:00 — Z (S)

1910.179 J03

Serious Gravity 02 4 instances 5 exposed

Issued: Aug 1, 2006
Abate by: Aug 11, 2006

Recent events (2)

2006-11-29 00:00:00 — F (S)
2006-08-01 00:00:00 — Z (S)

1910.147 C01

Serious Gravity 03 20 instances 35 exposed

Issued: Aug 1, 2006
Abate by: Sep 6, 2006
Penalty: Initial $1,125 · Current $562 Reduced

Recent events (2)

2006-11-29 00:00:00 — F (S) $562.00
2006-08-01 00:00:00 — Z (S) $1125.00

1910.157 G02

Serious Gravity 01 53 instances 53 exposed

Issued: Aug 1, 2006
Abate by: Sep 6, 2006
Penalty: Initial $675 · Current $387 Reduced

Recent events (2)

2006-11-29 00:00:00 — F (S) $387.00
2006-08-01 00:00:00 — Z (S) $675.00

1910.217 C02 IA

Serious Gravity 03 1 instance 4 exposed

Issued: Aug 1, 2006
Abate by: Aug 7, 2006
Penalty: Initial $1,125 · Current $562 Reduced

Recent events (2)

2006-11-29 00:00:00 — F (S) $562.00
2006-08-01 00:00:00 — Z (S) $1125.00

1910.305 G02 III

Serious Gravity 01 1 instance 5 exposed

Issued: Aug 1, 2006
Abate by: Aug 25, 2006
Penalty: Initial $675 · Current $387 Reduced

Recent events (2)

2006-11-29 00:00:00 — F (S) $387.00
2006-08-01 00:00:00 — Z (S) $675.00

1904.39 A

Deleted Other-than-serious Gravity 00 1 instance 1 exposed

Issued: Aug 1, 2006
Abate by: Aug 4, 2006
Penalty: Initial $3,000

Recent events (2)

2006-11-29 00:00:00 — F (O)
2006-08-01 00:00:00 — Z (O) $3000.00

1910.178 L04 III

Other-than-serious Gravity 01 2 instances 53 exposed

Issued: Aug 1, 2006
Abate by: Aug 11, 2006

Recent events (2)

2006-11-29 00:00:00 — F (O)
2006-08-01 00:00:00 — Z (O)

1910.178 L06

Other-than-serious Gravity 01 2 instances 2 exposed

Issued: Aug 1, 2006
Abate by: Aug 25, 2006

Recent events (2)

2006-11-29 00:00:00 — F (O)
2006-08-01 00:00:00 — Z (O)

More inspections in this industry (NAICS 332116)

Apr 23, 2026 Tecklane Manufacturing, INC. · SPRINGDALE, PA Feb 10, 2026 Blase Manufacturing Company · STRATFORD, CT Jan 7, 2026 110505 - RAO Manufacturing Company · MINNEAPOLIS, MN Dec 2, 2025 110353 - M-M Manufacturing INC DBA Product Fabricators · PINE CITY, MN Aug 27, 2025 68342 - Cannon Automotive Solutions - Bowling Green INC · RICHARDSVILLE, KY

More inspections in NJ

Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 East Orange Community Charter School · EAST ORANGE, NJ Jul 17, 2026 John Caruso Builders LLC · MOUNTAIN LAKES, NJ Jul 16, 2026 Borough of Pennington Department of Public Works · PENNINGTON, NJ

Source

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309779866.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.