Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HASE BUILDING AND DESIGN INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HASE BUILDING AND DESIGN INC in 410 MCINDOE STREET, WAUSAU, WI 54403 (NAICS 236220). OSHA activity number 309839926.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hase Building and Design INC — free Get an email when a new federal OSHA severe-injury report for Hase Building and Design INC is published. One employer, no account, unsubscribe in one click.
Site address
410 MCINDOE STREET
City
WAUSAU
State
WI
ZIP
54403
Mailing
1600 N 36TH AVENUE, WAUSAU, WI 54401
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236220
SIC code (legacy)
1542
Employees
15
Ownership type
A

2 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 8 exposed
Issued
Feb 6, 2008
Abate by
Mar 25, 2008
Penalty
Initial $1,500 · Current $1,050 Reduced
Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employmnent and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to multiple injuries and or death from falls or tip over of
an elevated work
platform:
a) At the site, employees were exposed to a fall of 20 feet when working
on a work horse
plank mounted on the midrails of the work platform, were exposed to the
unsecured platform
sliding off the forks of the rough terrain forklift, and a tip over hazard
due to the oversized
platform used. The work platform used to elevate employees did not meet
the design and use
requirements of the American Safety Standards of Rough Terrain Forklift
Trucks ASME/ANSI
B56.6-2002, in the following areas:
(1) Section 8.24.1(b): Platforms did not have a width greater than the
overall
width of the truck measured across the load bearing tires plus 10 inches
on either
side.
(2) Section 8.24(f); Information was not prominently indicated on the
platform (1)
the maximum work load including personnnel and equipment (2) the weight of
the
empty platform information prominently marked on the platform.
(3) Section 8.24(h): The platform was not secured to the lifting mechanism.
(4) Section 5.15.1(u): Elevating Personnel; Personnel are to maintain firm
footing
on platform floor unless secured by a body belt and lanyard.
Among other methods, feasible and acceptable means to correct these
hazards are
to use safer alternate methods such as a scaffold or use a platform
approved by
the manufacturer or meet the design, manufacture, and user requirements of
ASME/ANSI B56.6-2002; Safety Standards For Rough Terrain Forklift Trucks.
Abatement Certification or Abatement Documentation required.
Recent events (2)
  • — I (S) $1050.00
  • — Z (S) $1500.00

1926.100 A

Serious Gravity 01 1 instance 8 exposed
Issued
Feb 6, 2008
Abate by
Feb 11, 2008
Penalty
Initial $450 · Current $315 Reduced
Recent events (2)
  • — I (S) $315.00
  • — Z (S) $450.00

View Hase Building and Design INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309839926.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.