PENNDEL, PA —
OSHA Inspection: MOLDAMATIC INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of MOLDAMATIC INC. in 29 NOELAND AVE, PENNDEL, PA 19047 (NAICS 326199). OSHA activity number 309863231.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOLDAMATIC INC.
- Site address
- 29 NOELAND AVE
- City
- PENNDEL
- State
- PA
- ZIP
- 19047
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- SIC code (legacy)
- 3089
- Employees
- 110
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 23, 2007
- Abate by
- Apr 5, 2007
- Penalty
- Initial $1,400 · Current $980 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees operate powered industrial trucks without utilizing the operator restraining devices(seat belts) provided in the trucks: a. The employer does not furnish employment and a place of employment that is free from recognized hazards that are causing or likely to cause death or serious physical harm to employees. This is evident by the fact that on or about 2/28/07, employees outside building 3 were observed operating a powered industrial truck without using the personal restraining device(seat belt) supplied/installed by the manufacturer. The proper use of this device would protect the employee from death or serious injury in the vent the powered industrial truck would tip or roll over. To abate this violation, the employer must insure all employees operating powered industrial trucks use the personal restraining devices supplied/installed by the manufacturer. Date by Which This Violation Must be Abated: Pursuant to 29 CFR 1903.19(c) and (d), the employer must provide documentation that this violation has been abated within 10 calendar days of the abatement date. Abatement Note: Among other methods, one feasible and acceptable method is to: (a) Train/retrain employees in accordance with ASME/ANSI B56.1-2000, consensus Safety Standards for Powered Industrial Trucks. (b) ensure employees utilize the seat belts.
Recent events (2)
- — I (S) $980.00
- — Z (S) $1400.00
1910.37 F01
- Issued
- Mar 23, 2007
- Abate by
- Mar 28, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.95 D03
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.95 G01
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
1910.95 K01
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
1910.178 L04 III
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.215 B09
- Issued
- Mar 23, 2007
- Abate by
- Mar 28, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.219 D01
- Issued
- Mar 23, 2007
- Abate by
- Mar 28, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.219 E01 I
- Issued
- Mar 23, 2007
- Abate by
- Mar 28, 2007
1910.242 B
- Issued
- Mar 23, 2007
- Abate by
- Mar 28, 2007
- Penalty
- Initial $1,050 · Current $735 Reduced
Recent events (2)
- — I (S) $735.00
- — Z (S) $1050.00
1910.305 G01 III
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
- Penalty
- Initial $1,750 · Current $1,225 Reduced
Recent events (2)
- — I (S) $1225.00
- — Z (S) $1750.00
1910.132 D02
- Issued
- Mar 23, 2007
- Abate by
- Apr 25, 2007
1910.1200 E01
- Issued
- Mar 23, 2007
- Abate by
- Nov 6, 2007
Recent events (2)
- — P (O)
- — Z (O)
More inspections at Moldamatic INC.
View Moldamatic INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309863231.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.