NORTHAMPTON, PA ·
OSHA Inspection: TODD HELLER, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TODD HELLER, INC. in 799 SMITH LANE, NORTHAMPTON, PA 18067 (NAICS 423930). OSHA activity number 309865707.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TODD HELLER, INC.
- Site address
- 799 SMITH LANE
- City
- NORTHAMPTON
- State
- PA
- ZIP
- 18067
- Mailing
- P.O. BOX 95, NORTHAMPTON, PA 18067
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- SIC code (legacy)
- 5093
- Employees
- 70
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
- Penalty
- Initial $1,500 · Current $750 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck or buried by finished product being loaded into the trailer while they were picking ceramic or waste from the finished product in the trailer of the truck: a) Yard, Finished Glass area -- picking employees enter an approximate 40-foot trailer body being loaded to remove ceramic and waste from finished glass product as the loader operator continues to dump 10-foot wide bucketfuls (approximately 10,000 pounds each) of the finished glass product into the trailer, on or about 9/13/07. Among other methods, one feasible and acceptable abatement method to correct this hazard is: 1. Develop and enforce a written standard operating procedure, train all the employees, and enforce the procedure. 2. Install mirrors at strategic locations to allow the loader operator to be able to view the inside of the trailer, where the employees are working, from different angles. 3. Install warning devices on top of the trailer which warn the loader operators that a person is in the trailer. 4. Use and enforce the use of a buddy system (a co-worker to signal the loader operator that it is safe to dump the load). Or in the alternative: 29 CFR 1910.146(c)(4): The employer did not develop and implement a written permit space program that complies with this section for employees entering permit-required confined spaces: a) Yard, Finished Glass area -- picking employees enter an approximate 40-foot trailer body being loaded to remove ceramic and waste from finished glass product as the loader operator continues to dump 10-foot wide bucketfuls (approximately 10,000 pounds each) of the finished glass product into the trailer, on or about 9/13/07. Abatement note: This hazard may be abated through the implementation of a Permit Required Confined Space Program (in writing) which includes: 1. An evaluation of the workplace to determine if any confined spaces are permit-requied, 2. Measures necessary to prevent unauthorized entry, 3. Identification and evaluation of the hazards in permit spaces before employees enter them, and 4. Development and implementation of the means, procedures, and practices necessary for safe permit space entry operations. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $750.00
- · Z (S) $1500.00
1910.132 D01
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
- Penalty
- Initial $900
Recent events (2)
- · I (O)
- · Z (O) $900.00
1910.147 C04 I
- Issued
- Nov 21, 2007
- Abate by
- Feb 15, 2008
- Penalty
- Initial $1,200 · Current $1,200
Recent events (2)
- · I (S) $1200.00
- · Z (S) $1200.00
1910.147 C07 I
- Issued
- Nov 21, 2007
- Abate by
- Feb 15, 2008
Recent events (2)
- · I (S)
- · Z (S)
1910.147 C06 I
- Issued
- Nov 21, 2007
- Abate by
- Feb 15, 2008
Recent events (2)
- · I (S)
- · Z (S)
1910.178 L04 III
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
- Penalty
- Initial $1,200 · Current $1,200
1910.333 B02 I
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
- Penalty
- Initial $1,500
Recent events (2)
- · I (S)
- · Z (S) $1500.00
1910.132 D02
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
1910.132 F04
- Issued
- Nov 21, 2007
- Abate by
- Dec 27, 2007
Recent events (2)
- · I (O)
- · Z (O)
More inspections at Todd Heller, INC.
View Todd Heller, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309865707.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.