ALEXANDER, ND —
OSHA Inspection: CYCLONE DRILLING
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of CYCLONE DRILLING in GRIZZLY WELL #13-6H MCKENZIE COUNTY, ALEXANDER, ND 58831 (NAICS 213111). OSHA activity number 309913580.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CYCLONE DRILLING
- Site address
- GRIZZLY WELL #13-6H MCKENZIE COUNTY
- City
- ALEXANDER
- State
- ND
- ZIP
- 58831
- Mailing
- P.O. BOX 908, GILLETTE, WY 82717
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213111
- SIC code (legacy)
- 1381
- Employees
- 600
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 24, 2006
- Abate by
- Jul 24, 2006
- Penalty
- Initial $3,750 · Current $3,750
Recent events (2)
- — I (S) $3750.00
- — Z (S) $3750.00
5(a)(1)
- Issued
- Jul 24, 2006
- Abate by
- Jul 24, 2006
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Jun 21, 2006
- Abate by
- Jun 28, 2006
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushing hazards: (a) Grizzly Well #13-6H, McKenzie County, ND, the rated load capacity of the 1 1/2- inch diameter rope being used by employees to lift a gas separator tank was not determined. Among other methods, one feasible and acceptable method to correct the hazard is to verify the rope's rated load capacity and post that amount where the operators can see it. Abatement Note: Abatement certification is required for this item (see enclosed "Sample Abatement Certification Letter").tion
Recent events (2)
- — I (S) $5000.00
- — Z (S) $5000.00
5(a)(1)
- Issued
- Jun 21, 2006
- Abate by
- Jun 28, 2006
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a crushing hazard: (a) Grizzly Well #13-6H, McKenzie County, ND, for the employee who was working under the elevated gas separator and was fatally injured when the hoisting rope broke. Among other methods, one feasible and acceptable abatement method to correct this hazard is to formalize a lifting procedure that trains employees to not position themselves under a load being lifted. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Sample Abatement Certification Letter").tion
Recent events (2)
- — I (S) $5000.00
- — Z (S) $5000.00
More inspections at Cyclone Drilling
View Cyclone Drilling's full OSHA safety record →
More inspections in this industry (NAICS 213111)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 309913580.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.