OSHA Inspection: ADVANCED AUTO-MOTION, INC.

Issued

Jun 14, 2006

Abate by

Jul 18, 2006

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to struck by hazards:
a) The employer did not conduct daily and/or periodic inspections on the
above ground vehicle
lifts.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is
to follow ANSI/ALI ALOIM-2000, (Qualified Inspection Procedure), Section
5.1.
In accordance with 29 CFR 1903.19(d), abatement certification is required
for this violation
(using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in
addition, documentation demonstrating that the abatement is complete must
be included
with your certification. This documentation may include, but is not
limited
to, evidence of
the purchase or repair of the equipment, photographic or video evidence of
abatement, or
other written records.

Issued

Jun 14, 2006

Abate by

Jul 18, 2006

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to struck by hazards:
a) On or about May 24, 2006, the employer did not ensure the safety of the
employee(s) in that
the locking devices were broken/missing on two of the above ground
hydraulic lifts.
Among other methods, one feasible and acceptable abatement method to
correct this hazard is
to follow ANSI/ALI ALOIM-2000, (Inspection Points), Section 5.6.2.16.
In accordance with 29 CFR 1903.19(d), abatement certification is required
for this violation
(using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in
addition, documentation demonstrating that the abatement is complete must
be included
with your certification. This documentation may include, but is not
limited to, evidence of
the purchase or repair of the equipment, photographic or video evidence of
abatement, or
other written records.

Issued

Jun 14, 2006

Abate by

Jul 18, 2006