SMITHFIELD, NC —
OSHA Inspection: FLANDERS PRECISIONAIRE, CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FLANDERS PRECISIONAIRE, CORP. in 2121-B WAL PAT RD, SMITHFIELD, NC 27524 (NAICS 333411). OSHA activity number 310044789.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FLANDERS PRECISIONAIRE, CORP.
- Site address
- 2121-B WAL PAT RD
- City
- SMITHFIELD
- State
- NC
- ZIP
- 27524
- Mailing
- 1418/1420 WAL PAT RD., SMITHFIELD, NC 27524
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333411
- SIC code (legacy)
- 3564
- Employees
- 2794
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
- Penalty
- Initial $1,400 · Current $900 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to: a)site, Naturalaire Dept. - on or about 08/25/06 an employee was observed operating a powered industrial truck, Toyota, model #42-6FGCU15, serial #66414, 6,210 lbs. capacity, when the installed and attached seat belt was not fastened and in use. Among others, one feasible and acceptable abatement method, among others, to correct this hazard is to develop, establish and/or update written procedures on proper equipment usage, train and/or retrain employees on applicable and acceptable established procedures, prohibit employees from performing and/or attempting to perform inappropriate and unsafe procedures, and enforce established and/or applicable policies and procedures for equipment usage. Reference:Toyota Powered Industrial Truck Operator's Manual, Model 42-6FGCU15
Recent events (2)
- — I (S) $900.00
- — Z (S) $1400.00
1910.178 L01 I
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L06
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.178 Q01
- Issued
- Jan 5, 2007
- Abate by
- Jan 5, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.178 Q07
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.132 D01
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
- Penalty
- Initial $1,200
Recent events (2)
- — I (S)
- — Z (S) $1200.00
1910.133 A01
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.1200 E01
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (O)
- — Z (S)
1910.147 C04 I
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
- Penalty
- Initial $2,000
Recent events (2)
- — I (S)
- — Z (S) $2000.00
1910.147 C01
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
- Penalty
- Current $1,300
Recent events (2)
- — I (S) $1300.00
- — Z (S)
1910.157 C01
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
1910.157 E02
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
1910.157 E03
- Issued
- Jan 5, 2007
- Abate by
- Jan 10, 2007
More inspections at Flanders Precisionaire, Corp.
View Flanders Precisionaire, Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 333411)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310044789.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.