BURLINGTON, NC —
OSHA Inspection: WICKER SERVICES , INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WICKER SERVICES , INC. in 2956 TUCKER STREET, BURLINGTON, NC 27215 (NAICS 484121). OSHA activity number 310397914.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WICKER SERVICES , INC.
- Site address
- 2956 TUCKER STREET
- City
- BURLINGTON
- State
- NC
- ZIP
- 27215
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484121
- SIC code (legacy)
- 4213
- Employees
- 97
- Ownership type
- A
- Industry flags
- Manufacturing safety.
Citations
18 citations on file for this inspection.
95012901
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
- Penalty
- Initial $263 · Current $263
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to being struck or caught in between: a) the rollover protections in the event employee was thrown off one of the ten forklifts. Employees operating ten of the twelve forklifts (Yale, Mitsubish, Hyster, and Komatsu) that were not provided with seatbelts installed per manufacture requirements based on seatbelt anchoring plates being installed exposing them to being caught in between/crushed from not being able to use seatbelts. Among other methods, one feasible and acceptable abatement method to correct this hazard is to install, train, and require employees to wear seatbelts.
1910.124 G02
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
- Penalty
- Initial $375 · Current $375
1910.146 C03
- Issued
- Jan 17, 2007
- Abate by
- Mar 6, 2007
- Penalty
- Initial $263 · Current $263
1910.146 C02
- Issued
- Jan 17, 2007
- Abate by
- Jan 22, 2007
1910.215 D03
- Issued
- Jan 17, 2007
- Abate by
- Jan 22, 2007
- Penalty
- Initial $188 · Current $188
1910.304 F04
- Issued
- Jan 17, 2007
- Abate by
- Jan 22, 2007
- Penalty
- Initial $113 · Current $113
1910.334 A02 I
- Issued
- Jan 17, 2007
- Abate by
- Jan 22, 2007
1910.37 B01
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.37 B06
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.132 D02
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.132 F04
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.157 C01
- Issued
- Jan 17, 2007
- Abate by
- Jan 22, 2007
1910.157 C04
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.157 E02
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.157 G02
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.178 L03 IA
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.178 L03 IM
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
1910.1200 E01
- Issued
- Jan 17, 2007
- Abate by
- Feb 12, 2007
More inspections at Wicker Services , INC.
View Wicker Services , INC.'s full OSHA safety record →
More inspections in this industry (NAICS 484121)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310397914.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.