MORGANTON, NC —
OSHA Inspection: SYPRIS TECHNOLOGIES, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SYPRIS TECHNOLOGIES, INC. in 105 WAMSUTTA MILL RD., MORGANTON, NC 28655 (NAICS 336350). OSHA activity number 310806914.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SYPRIS TECHNOLOGIES, INC.
- Site address
- 105 WAMSUTTA MILL RD.
- City
- MORGANTON
- State
- NC
- ZIP
- 28655
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336350
- SIC code (legacy)
- 3714
- Employees
- 280
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
14 citations on file for this inspection.
95012901
- Issued
- Apr 2, 2007
- Abate by
- Apr 12, 2007
- Penalty
- Initial $487 · Current $317 Reduced
General-duty citation text
North Carolina General Duty Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish to each of his employees conditions of employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: a) Facility, Battery Charging Area - Plumbed emergency eyewash and shower was not located on the same level as the hazard. REF:ANSI Z358.1-1998, Chapter 9, Paragraph 9.4.1 Combination units shall be in accessible locations that require no more than 10 seconds to reach. The combination unit shall be located on the same level as the hazard and the path of travel shall be free of obstructions that may inhibit the immediate use of the equipment. NOTE: Among other methods, one feasible acceptable abatement method to correct this hazard is to relocate the emergency eyewash and shower per the requirements of section 9.4.1 of ANSI Z358.1-1998.
Recent events (2)
- — I (S) $317.00
- — Z (S) $487.00
1910.132 A
- Issued
- Apr 2, 2007
- Abate by
- Apr 12, 2007
- Penalty
- Initial $2,275 · Current $1,479 Reduced
Recent events (2)
- — I (S) $1479.00
- — Z (S) $2275.00
1910.151 C
- Issued
- Apr 2, 2007
- Abate by
- Apr 12, 2007
1910.304 F04
- Issued
- Apr 2, 2007
- Abate by
- Apr 12, 2007
- Penalty
- Initial $1,137 · Current $739 Reduced
Recent events (2)
- — I (S) $739.00
- — Z (S) $1137.00
1910.304 F05 V
- Issued
- Apr 2, 2007
- Abate by
- Apr 12, 2007
1910.36 H03
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.37 B04
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.178 Q07
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.242 A
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.303 B02
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.303 G01 II
- Issued
- Apr 2, 2007
- Abate by
- Apr 5, 2007
1910.305 B01
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
1910.334 A02 II
- Issued
- Apr 2, 2007
- Abate by
- Apr 5, 2007
1910.1200 F05 II
- Issued
- Apr 2, 2007
- Abate by
- Apr 26, 2007
More inspections at Sypris Technologies, INC.
View Sypris Technologies, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336350)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310806914.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.