SINKING SPRING, PA —
OSHA Inspection: WER CORPORATION DBA ALUMINUM ALLOYS, INCORPORATED
Accident-driven inspection · Safety discipline
At a glance
On , OSHA opened an accident-driven safety inspection of WER CORPORATION DBA ALUMINUM ALLOYS, INCORPORATED in 4601 PENN AVENUE, SINKING SPRING, PA 19608 (NAICS 331524). OSHA activity number 310845771.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WER CORPORATION DBA ALUMINUM ALLOYS, INCORPORATED
- Site address
- 4601 PENN AVENUE
- City
- SINKING SPRING
- State
- PA
- ZIP
- 19608
- Mailing
- 4601 PENN AVENUE, P.O. BOX 2197, SINKING SPRING, PA 19608
What kind of inspection was it?
- Inspection type
- Accident-driven (A)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331524
- SIC code (legacy)
- 3365
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 24, 2008
- Abate by
- Oct 21, 2008
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falls to lower levels: (a)Foundry - Employees used a wooden, 12-foot long, 2x10 plank as a work platform while performing servicing and maintenance work on the rotary drum. Employees also used the wooden plank on a daily basis when readying the rotary drum for production. At one end, the wooden plank rested on an 11-foot high, fixed, metal platform at the entrance or hopper end of the rotary drum. At the other end, the wooden plank rested on a 10-foot high, fixed, metal platform at the exit end of the rotary drum. Nothing secured the wooden plank from movement nor did the plank sufficiently overlap either of the fixed, metal platforms upon which its ends rested. On July 12, 2008, as two employees stood near the end of the wooden plank which rested on the 11-foot high metal platform at the hopper end of the rotary drum, that end of the wooden plank fell, causing the employees to fall to the floor. One of the employees suffered fatal injuries in the fall. ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct this hazard includes securing the wooden platform from movement by cleating or otherwise restraining it by hooks or equivalent means at both ends or extending the platform no less than six inches and not more than 18 inches over the end supports. VERIFICATION REQUIREDTION
1910.23 C01
- Issued
- Sep 24, 2008
- Abate by
- Oct 21, 2008
- Penalty
- Initial $2,800 · Current $2,800
1910.147 C07 I
- Issued
- Sep 24, 2008
- Abate by
- Oct 27, 2008
- Penalty
- Initial $1,200 · Current $1,200
1910.147 C08
- Issued
- Sep 24, 2008
- Abate by
- Oct 27, 2008
1910.147 F03 IID
- Issued
- Sep 24, 2008
- Abate by
- Oct 27, 2008
More inspections at WER Corporation DBA Aluminum Alloys, Incorporated
View WER Corporation DBA Aluminum Alloys, Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 331524)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310845771.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.