MIDWAY, GA ·
OSHA Inspection: TRUSSMART BUILDING COMPONENTS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of TRUSSMART BUILDING COMPONENTS, LLC in 170 ELAN COURT, MIDWAY, GA 31320 (NAICS 321214). OSHA activity number 310991864.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRUSSMART BUILDING COMPONENTS, LLC
- Site address
- 170 ELAN COURT
- City
- MIDWAY
- State
- GA
- ZIP
- 31320
- Mailing
- 170 ELAN COURT, MIDWAY, GA 31320
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- SIC code (legacy)
- 2439
- Employees
- 19
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 29, 2009
- Abate by
- May 26, 2009
- Penalty
- Initial $5,000 · Current $1,104 Reduced
General-duty citation text
P.L. 91-596 Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard(s) of: Employees were exposed to a crushing and amputation hazard while working on or near a Alpine Floor Truss Machine, System 42, Speed Roll. a) Alpine Floor Truss Machine - On or about December 11, 2008, Trussmart Building Components, LLC, employees were exposed to a crushing and amputation hazard while working on or near a Alpine Floor Truss Machine, System 42, Speed Roll. Among other methods, one feasible and acceptable abatement method to correct this hazard is to follow the manufactures safe operating procedures and install solenoid switches that meet manufacture specifications.
Recent events (2)
- · I (S) $1104.00
- · Z (S) $5000.00
1910.138 A
- Issued
- Apr 29, 2009
- Abate by
- May 26, 2009
- Penalty
- Initial $1,875 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1875.00
1910.141 A03 I
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.212 A01
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $2,625 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $2625.00
1910.219 E03 I
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $2,625 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $2625.00
1910.219 F03
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $2,625 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $2625.00
1910.242 B
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.303 B02
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.303 F02
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.303 G01
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.303 G02 I
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,104 Reduced
Recent events (2)
- · I (S) $1104.00
- · Z (S) $1500.00
1910.305 B01
- Issued
- Apr 29, 2009
- Abate by
- May 4, 2009
- Penalty
- Initial $1,500 · Current $1,113 Reduced
Recent events (2)
- · I (S) $1112.60
- · Z (S) $1500.00
More inspections in this industry (NAICS 321214)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 310991864.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.