FAIRFIELD, NJ —
OSHA Inspection: HEISLER INDUSTRIES INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HEISLER INDUSTRIES INC. in 224 PASSAIC AVE, FAIRFIELD, NJ 07004 (NAICS 333993). OSHA activity number 311058648.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HEISLER INDUSTRIES INC.
- Site address
- 224 PASSAIC AVE
- City
- FAIRFIELD
- State
- NJ
- ZIP
- 07004
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333993
- SIC code (legacy)
- 3565
- Employees
- 64
- Ownership type
- A
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 30, 2007
- Abate by
- Dec 5, 2007
- Penalty
- Initial $2,500 · Current $1,500 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: Amputation/Caught-In Between Hazards a) Worksite located at 224 Passaic Ave., Fairfield, NJ An employee's arm and wrist were severely lacerated when caught in between the ram and the metal frame of a case packer machine. Violation disclosed on or about 6/4/07 AMONG OTHERS, ONE FEASIBLE AND REASONABLE ABATEMENT METHOD IS: 1) To create and implement a standard operating procedure for the testing of equipment during the programmable logic controller (PLC) to equipment interface phase of assemblye
Recent events (2)
- — I (S) $1500.00
- — Z (S) $2500.00
1910.37 A03
- Issued
- Nov 30, 2007
- Abate by
- Dec 5, 2007
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.107 B08
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1250.00
1910.107 B10
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.107 C08
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.107 H12
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.134 C01
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.134 E01
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.134 F02
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.134 K01
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.178 L01 II
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.219 E03 I
- Issued
- Nov 30, 2007
- Abate by
- Dec 5, 2007
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.303 F
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
- Penalty
- Initial $750 · Current $450 Reduced
Recent events (2)
- — I (S) $450.00
- — Z (S) $750.00
1910.303 G01 II
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.307 B
- Issued
- Nov 30, 2007
- Abate by
- Jan 18, 2008
- Penalty
- Initial $1,250 · Current $750 Reduced
Recent events (2)
- — I (S) $750.00
- — Z (S) $1250.00
More inspections at Heisler Industries INC.
View Heisler Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333993)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311058648.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.