WILLIAMSTOWN, NJ —
OSHA Inspection: VFI FABRICATORS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of VFI FABRICATORS, INC. in 300 THOMAS AVE, BLDG 1, SUITE 101, WILLIAMSTOWN, NJ 08094 (NAICS 332322). OSHA activity number 311159065.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VFI FABRICATORS, INC.
- Site address
- 300 THOMAS AVE, BLDG 1, SUITE 101
- City
- WILLIAMSTOWN
- State
- NJ
- ZIP
- 08094
- Mailing
- PO BOX 263, WILLIAMSTOWN, NJ 08094
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- SIC code (legacy)
- 3444
- Employees
- 25
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 4, 2007
- Abate by
- Dec 15, 2007
- Penalty
- Initial $750 · Current $465 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard: a) Production Area - Where point of operation guarding was not feasible, the employer did not develop and implement a minimum safe distance program for the protection of employees who operated press brakes including, but not limited to 123 ton Darley press brake (model EHP 110 31/25, sn #12800) and the 60 ton Darley press brake (model EHP 50 25/20, sn #122143). On or about 7/10/07. One feasible and acceptable abatement method is to develop and implement a minimum safe distance program that conforms to the requirements of ANSI B11.3-1982, Paragraph 6.1.4.3 and OSHA Directive CPL 2-1.25. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.95 D01
- Issued
- Oct 4, 2007
- Abate by
- Oct 10, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.95 G01
- Issued
- Oct 4, 2007
- Abate by
- Oct 31, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.95 I02 IIA
- Issued
- Oct 4, 2007
- Abate by
- Oct 24, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.95 K01
- Issued
- Oct 4, 2007
- Abate by
- Oct 31, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.147 C01
- Issued
- Oct 4, 2007
- Abate by
- Dec 15, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.178 L01 II
- Issued
- Oct 4, 2007
- Abate by
- Dec 15, 2007
- Penalty
- Initial $750 · Current $465 Reduced
Recent events (2)
- — I (S) $465.00
- — Z (S) $750.00
1910.303 B02
- Issued
- Oct 4, 2007
- Abate by
- Oct 10, 2007
- Penalty
- Initial $750 · Current $445 Reduced
Recent events (2)
- — I (S) $445.00
- — Z (S) $750.00
1904.29 A
- Issued
- Oct 4, 2007
- Abate by
- Dec 15, 2007
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 E01
- Issued
- Oct 4, 2007
- Abate by
- Jan 15, 2008
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 G08
- Issued
- Oct 4, 2007
- Abate by
- Oct 31, 2007
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H01
- Issued
- Oct 4, 2007
- Abate by
- Jan 15, 2008
Recent events (2)
- — I (O)
- — Z (O)
More inspections at VFI Fabricators, INC.
View VFI Fabricators, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311159065.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.