Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ACE FORMING SYSTEMS INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ACE FORMING SYSTEMS INC in LOTE 17 URB INDUSTRIAL CORUJO HATO TEJAS, BAYAMON, PR 00961 (NAICS 444190). OSHA activity number 311188569.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ACE Forming Systems INC — free Get an email when a new federal OSHA severe-injury report for ACE Forming Systems INC is published. One employer, no account, unsubscribe in one click.
Site address
LOTE 17 URB INDUSTRIAL CORUJO HATO TEJAS
City
BAYAMON
State
PR
ZIP
00961
Mailing
PO BOX 363137, SAN JUAN, PR 00936
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
N
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444190
SIC code (legacy)
5211
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.110 F06 II

Serious Gravity 02 1 instance 5 exposed
Issued
Apr 3, 2009
Abate by
Apr 8, 2009
Penalty
Initial $700 · Current $400 Reduced
Recent events (2)
  • — F (S) $400.00
  • — Z (S) $700.00

1910.303 G01

Deleted Serious Gravity 02 1 instance 5 exposed
Issued
Apr 3, 2009
Abate by
Apr 8, 2009
Penalty
Initial $700
Recent events (2)
  • — F (S)
  • — Z (S) $700.00

1910.303 G02 I

Serious Gravity 10 1 instance 5 exposed
Issued
Apr 3, 2009
Abate by
Apr 8, 2009
Penalty
Initial $2,500 · Current $300 Reduced
Recent events (2)
  • — F (S) $300.00
  • — Z (S) $2500.00

1910.141 A03 I

Serious Gravity 01 1 instance 5 exposed
Issued
Apr 3, 2009
Abate by
Apr 29, 2009
Penalty
Initial $525 · Current $100 Reduced
Recent events (2)
  • — F (S) $100.00
  • — Z (S) $525.00

6A0001

Deleted Other-than-serious Gravity 01 1 instance 5 exposed
Issued
Apr 3, 2009
Abate by
Apr 29, 2009
Penalty
Initial $500
Section 6(a) of the Puerto Rico Occupational Safety and Health Act:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or physical harm to employees in
that employees were
exposed to:
Seccion 6(a) de la Ley de Seguridad y Salud en el Trabajo de Puerto Rico:
El patrono no
proveyo empleo y un sitio de empleo libre de riesgos reconocidos que esten
causando o que
puedan causar muerte o dano fisico a los empleados, por cuanto empleados
estaban expuestos
a:
At ACE Forming Systems, Inc., the employer did not provide training to his
employees
ralated to the establishment of a written protocol to handle domestic
violence in the
workplace, as required by the Act for the Implementation of a Protocol to
Handle
Domestic Violence Situations in the Workplace or Place of Employment, Act
No.
217
of 2006.
Hazard: Fatalities, injuries, and illnesses related to domestic violence
in the workplace.
Method to abate the hazard: The employer shall provide training to all the
establishment's employees related to a written protocol to handle domestic
violence in
the workplace. Information is available at the Women's Advocate Office, A
Guide for
Employers: Domestic Violence in the Workplace and other references
provided during
the inspection.
En ACE Forming Systems, Inc., el patrono no proveyo adiestramiento a sus
empleados
relacionado al establecimiento de un protocolo escrito para manejar
situaciones de
violencia domestica en el lugar de trabajo, como lo requiere la Ley para la
Implementacion del Protocolo para Manejar Situaciones de Violencia
Domestica en el
Sitio de Trabajo, Ley Num. 217 del 2006.
Riesgo: Fatalidades, lesiones, y enfermedades relacionadas a la violencia
domestica en
el sitio de trabajo.
Metodo de corregir el riesgo: El patrono tiene que proveer adiestramiento
a todos los
empleados del establecimiento relacionado con un protocolo escrito para el
manejo de la
violencia domestica en el sitio de trabajo. Hay informacion disponible en
la Oficina de
la Procuradora de la Mujer, Una Guia para Patronos: Violencia Domestica en
el Sito de
Trabajo, y otras referencias provistas durante la inspeccion.
Recent events (2)
  • — F (O)
  • — Z (O) $500.00

View ACE Forming Systems INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311188569.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.