BENSALEM, PA —
OSHA Inspection: COREN METAL CRAFTS, CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of COREN METAL CRAFTS, CO. in 600 CENTER AVE., BENSALEM, PA 19020 (NAICS 332312). OSHA activity number 311266357.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COREN METAL CRAFTS, CO.
- Site address
- 600 CENTER AVE.
- City
- BENSALEM
- State
- PA
- ZIP
- 19020
- Mailing
- P.O. BOX 1005, BENSALEM, PA 19020
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- SIC code (legacy)
- 3441
- Employees
- 15
- Ownership type
- A
Citations
11 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 10, 2007
- Abate by
- Nov 5, 2007
- Penalty
- Initial $750 · Current $525 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to amputation hazards: a) Di Aero Houdcille Press Break - The foot treadle on the press brake was not guarded on or about 9/5/07. ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct his hazard is to have the cover placed back on the foot treadle. IN THE ALTERNATIVE: 29CFR1910.212(a)(1) - One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation: a) Di Aero Houdcille Press Break - The foot treadle on the press brake was not guarded on or about 9/5/07. ABATEMENT NOTE: Among other methods, one feasible and acceptable abatement method to correct his hazard is to have the cover placed back on the foot treadle. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.22 A01
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.22 B01
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
1910.178 L01 I
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.212 A01
- Issued
- Oct 10, 2007
- Abate by
- Nov 5, 2007
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1910.212 A03 II
- Issued
- Oct 10, 2007
- Abate by
- Nov 5, 2007
- Penalty
- Initial $750 · Current $525 Reduced
Recent events (2)
- — I (S) $525.00
- — Z (S) $750.00
1910.219 E01 I
- Issued
- Oct 10, 2007
- Abate by
- Oct 15, 2007
- Penalty
- Initial $450 · Current $315 Reduced
Recent events (2)
- — I (S) $315.00
- — Z (S) $450.00
1910.303 B02
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
- Penalty
- Initial $600 · Current $420 Reduced
Recent events (2)
- — I (S) $420.00
- — Z (S) $600.00
1910.305 B01
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
1910.305 G02 III
- Issued
- Oct 10, 2007
- Abate by
- Nov 15, 2007
1904.2 A02
- Issued
- Oct 10, 2007
- Abate by
- Nov 28, 2007
More inspections at Coren Metal Crafts, CO.
View Coren Metal Crafts, CO.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311266357.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.