CHICAGO, IL —
OSHA Inspection: INDUSTRIAL MAINTENANCE WELDING & MACHINE CO.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of INDUSTRIAL MAINTENANCE WELDING & MACHINE CO. in 4806 S. HALSTED, CHICAGO, IL 60609 (NAICS 333513). OSHA activity number 311374839.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- INDUSTRIAL MAINTENANCE WELDING & MACHINE CO.
- Site address
- 4806 S. HALSTED
- City
- CHICAGO
- State
- IL
- ZIP
- 60609
- Mailing
- 1431 W. PERSHING ROAD, CHICAGO, IL 60609
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333513
- SIC code (legacy)
- 3542
- Employees
- 90
- Ownership type
- A
Citations
13 citations on file for this inspection.
5(a)(1)
- Issued
- Aug 1, 2008
- Abate by
- Aug 6, 2008
- Penalty
- Initial $2,500 · Current $1,250 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational safety and Health Act of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: On or about June 18, 2008, employees were allowed to work at heights from pallets which were supported by the forks of industrial trucks in order to weld on top of the dipper bucket. The employees were not provided an adequate work surface nor any means of fall protection and thereby were exposed to falls of up to 10 feet to the ground. Among other methods, feasible and acceptable abatement methods include following the requirements for lifting personnel explained in the ANSI/ASME B45.1-2000 Safety Standard for Low and High Lift Trucks.
Recent events (2)
- — I (S) $1250.00
- — Z (S) $2500.00
1910.132 A
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
1910.147 C04 II
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.147 C06 I
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
1910.178 L04 III
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.179 G01 V
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.179 J02 III
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.184 I09 III
- Issued
- Aug 1, 2008
- Abate by
- Aug 6, 2008
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.212 A01
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.243 C01
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1910.332 B01
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
- Penalty
- Initial $1,250 · Current $625 Reduced
Recent events (2)
- — I (S) $625.00
- — Z (S) $1250.00
1910.333 B02 I
- Issued
- Aug 1, 2008
- Abate by
- Sep 18, 2008
1910.334 A02 I
- Issued
- Aug 1, 2008
- Abate by
- Aug 6, 2008
- Penalty
- Initial $750 · Current $375 Reduced
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
More inspections at Industrial Maintenance Welding & Machine CO.
View Industrial Maintenance Welding & Machine CO.'s full OSHA safety record →
More inspections in this industry (NAICS 333513)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311374839.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.