CONCORD, NC ·
OSHA Inspection: PALLETECH, INC. DBA PACKAGING TECHNOLOGY INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PALLETECH, INC. DBA PACKAGING TECHNOLOGY INC in 165 BRUMLEY AVENUE, NE, CONCORD, NC 28025 (NAICS 424130). OSHA activity number 311385314.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PALLETECH, INC. DBA PACKAGING TECHNOLOGY INC
- Site address
- 165 BRUMLEY AVENUE, NE
- City
- CONCORD
- State
- NC
- ZIP
- 28025
- Mailing
- PO BOX 1081, LEXINGTON, NC 27293
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (N)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424130
- SIC code (legacy)
- 5113
- Employees
- 5
- Ownership type
- Private (A)
- Industry flags
- Manufacturing safety.
Citations
13 citations on file for this inspection.
95012901
- Issued
- Sep 17, 2007
- Abate by
- Nov 2, 2007
- Penalty
- Initial $700 · Current $350 Reduced
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to caught between and/or struck by hazards: a)establishment, loading/unloading dock, Mitsubishi Type G powered industrial fork lift - the fork lift was not equipped with seat belts and the operator was exposed to the hazard of falling out of the fork lift during a drive off or tipover and caught between the overhead roll over protective system and the pavement or ground. Among other methods, one feasible and acceptable abatement method would be to install the seat belt retro fit kit provided by Mitsubishi and to require its use to keep the operator inside the truck in the event of a tipover.
Recent events (2)
- · I (S) $350.00
- · Z (S) $700.00
1910.147 C01
- Issued
- Sep 17, 2007
- Abate by
- Nov 2, 2007
- Penalty
- Initial $500 · Current $250 Reduced
Recent events (2)
- · I (S) $250.00
- · Z (S) $500.00
1910.178 Q01
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
- Penalty
- Initial $500 · Current $250 Reduced
Recent events (2)
- · I (S) $250.00
- · Z (S) $500.00
1910.212 A01
- Issued
- Sep 17, 2007
- Abate by
- Nov 2, 2007
- Penalty
- Initial $500 · Current $250 Reduced
Recent events (2)
- · I (S) $250.00
- · Z (S) $500.00
1910.219 F01
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
- Penalty
- Initial $250 · Current $125 Reduced
Recent events (2)
- · I (S) $125.00
- · Z (S) $250.00
1910.22 B01
- Issued
- Sep 17, 2007
- Abate by
- Sep 25, 2007
1910.22 D01
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
1910.132 D02
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
1910.157 C01
- Issued
- Sep 17, 2007
- Abate by
- Sep 25, 2007
1910.157 G01
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
1910.178 L04 IIE
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
1910.303 G01 II
- Issued
- Sep 17, 2007
- Abate by
- Sep 25, 2007
1910.1200 E01
- Issued
- Sep 17, 2007
- Abate by
- Oct 12, 2007
More inspections in this industry (NAICS 424130)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 311385314.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.