CUDAHY, WI —
OSHA Inspection: VILTER MANUFACTURING LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of VILTER MANUFACTURING LLC in 5555 S. PACKARD AVE., CUDAHY, WI 53110 (NAICS 333415). OSHA activity number 311401590.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VILTER MANUFACTURING LLC
- Site address
- 5555 S. PACKARD AVE.
- City
- CUDAHY
- State
- WI
- ZIP
- 53110
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- SIC code (legacy)
- 3585
- Employees
- 264
- Ownership type
- A
Citations
15 citations on file for this inspection.
5(a)(1)
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
- Penalty
- Initial $2,250 · Current $2,250
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employee(s) were exposed to flying casting pieces, components and test fluid: (a)Employee(s) in the machine shop by column K23 are exposed to struck by hazards from cast iron compressor parts and Quakercool 6219 when visually inspecting the cast iron parts for leaks during hydrostatic pressure testing of reciprocating cast iron compressor housings and components. Struck-by hazards exist in the event the cast iron parts and compressor were to become over pressurized. One feasible means of abatement would be to conduct the testing in an enclosed test stand that would contain cast iron compressor pieces, components and test fluid in the event a failure occurs. Certification, and documentation/evidence of abatement is required. Certification of abatement is required by 29 CFR Part 1903 and is to be submitted within ten (10) calendar days after the abatement date.ment
Recent events (2)
- — F (S) $2250.00
- — Z (S) $2250.00
1910.147 C01
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
- Penalty
- Initial $4,500 · Current $3,000 Reduced
Recent events (2)
- — I (S) $3000.00
- — Z (S) $4500.00
1910.147 C04 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
Recent events (2)
- — I (S)
- — Z (S)
1910.147 C07 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
Recent events (3)
- — Q $2250.00
- — I (S)
- — Z (S) $2250.00
1910.147 C07 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
- Penalty
- Initial $2,250 · Current $2,250
Recent events (2)
- — I (S) $2250.00
- — Z (S) $2250.00
1910.212 A01
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
- Penalty
- Initial $2,250 · Current $2,250
Recent events (2)
- — I (S) $2250.00
- — Z (S) $2250.00
1910.212 A03 II
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
- Penalty
- Initial $4,500 · Current $4,500
Recent events (2)
- — I (S) $4500.00
- — Z (S) $4500.00
1910.217 B04 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
- Penalty
- Initial $2,250 · Current $2,250
Recent events (2)
- — I (S) $2250.00
- — Z (S) $2250.00
1910.217 C01 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
- Penalty
- Initial $2,250 · Current $2,250
Recent events (2)
- — I (S) $2250.00
- — Z (S) $2250.00
1910.212 A01
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
- Penalty
- Current $2,250
Recent events (3)
- — Q $2250.00
- — I (S) $2250.00
- — Z (S) $2250.00
1910.212 A03 II
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
Recent events (3)
- — Q $4500.00
- — I (S)
- — Z (S) $4500.00
1910.217 B04 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
Recent events (3)
- — Q $2250.00
- — I (S)
- — Z (S) $2250.00
1910.217 C01 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 6, 2009
Recent events (3)
- — Q $2250.00
- — I (S)
- — Z (S) $2250.00
1910.1200 E01 I
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 H01
- Issued
- Mar 31, 2009
- Abate by
- Apr 13, 2009
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Vilter Manufacturing LLC
View Vilter Manufacturing LLC's full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311401590.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.