OSHA Inspection: R L CONSTRUCTION

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Penalty

Initial $1,500 · Current $1,125 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to a crushing and/or struck-by hazard:
(a) On or about 11/08/07, and at times prior to that date, employees
operating, and being
lifted on a personnel platform, on the Lull 644-D rough terrain forklift,
serial
#99AL25W24-696, were exposed to the hazard of forklift rollover created by
the rough
terrain forklift being operated beyond the load handling capabilities and
limitations of the
all terrain forklift.
Among other methods, one feasible and acceptable abatement method to
correct this
hazard is to follow the operator's manual for the Lull 644-D telescoping
rough terrain
forklift, serial #99Al25W24-696, and the requirements of ANSI B56.6-2005
Safety
Standard for Rough Terrain Forklifts for operating this all terrain
forklift.
Abatement Note:  Abatement certification and documentation are required
for this item (see
enclosed "Sample Abatement Certification Letter").tion

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Penalty

Initial $1,500 · Current $1,125 Reduced

General-duty citation text

Section 5(a)(1) of the Occupational Safety and Health Act of 1970:  The
employer did not
furnish employment and a place of employment which were free from
recognized hazards that
were causing or likely to cause death or serious physical harm to
employees in that employees
were exposed to crushing and/or struck-by hazards:
(a) On or about 11/08/07, and at times prior to that date, employees
operating the Lull
644-D rough terrain forklift, serial #99AL25W24-696, and not wearing the
seat belt
located in the operator's cab were exposed to the potential for injury
created by forklift
rollover.
Among other methods, one feasible and acceptable abatement method to
correct
this
hazard is to follow the requirement of ANSI B56.6-2005 Safety Standard for
Rough
Terrain Forklifts paragraph 6.2.1 (a) which states: "Before starting to
operate the rough
terrain forklift truck the operator will be in operating position and
fasten seat belt, if so
equipped."
Abatement Note:  Abatement certification and documentation are required
for this item (see
enclosed "Sample Abatement Certification Letter").tion

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Penalty

Initial $1,500 · Current $1,125 Reduced

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Penalty

Initial $1,500 · Current $1,125 Reduced

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Issued

Dec 7, 2007

Abate by

Jan 10, 2008

Penalty

Initial $300 · Current $225 Reduced