MASSILLON, OH —
OSHA Inspection: REPUBLIC ENGINEERED PRODUCTS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of REPUBLIC ENGINEERED PRODUCTS in 401 ROSE AVENUE SE, MASSILLON, OH 44646 (NAICS 331221). OSHA activity number 311492201.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REPUBLIC ENGINEERED PRODUCTS
- Site address
- 401 ROSE AVENUE SE
- City
- MASSILLON
- State
- OH
- ZIP
- 44646
- Mailing
- 401 ROSE AVENUE SE, MASSILLON, OH 44646
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Y
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331221
- SIC code (legacy)
- 3316
- Employees
- 176
- Ownership type
- A
Citations
12 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
- Penalty
- Initial $2,500 · Current $1,000 Reduced
General-duty citation text
5(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees. Section 5(a)(1) of the Occupational Safety and Health Act of 1970: the employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees working in Plant #1 in the Rough Stock area, in that employees were exposed to struck by and/or crushing hazards from materials suspended from a spreader beam below-the- hook lifting device that was not properly marked. The spreader beam did not have a nameplate or other permanent marking that conveyed the manufacturer's name and address, serial number, lifter weight, and rated load. This information is needed by crane operators so the spreader beam weight (1,926 lbs.) can be calculated into the overall lift weight to ensure the crane is not overloaded causing equipment failure. One feasible and acceptable abatement method to correct this hazard is to mark the spreader beam in accordance with ASME B30.20-2003 Below-The-Hook Lift Devices.e-Hook
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2500.00
1910.179 H01 I
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2000.00
1910.179 J03
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2000.00
1910.179 L03 I
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
- Penalty
- Initial $7,000 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $7000.00
1910.179 N03 VI
- Issued
- Jul 25, 2008
- Abate by
- Sep 22, 2008
- Penalty
- Initial $5,000 · Current $2,000 Reduced
Recent events (2)
- — I (S) $2000.00
- — Z (S) $5000.00
1910.179 N03 X
- Issued
- Jul 25, 2008
- Abate by
- Aug 2, 2008
- Penalty
- Initial $1,500 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $1500.00
1910.184 D
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
- Penalty
- Initial $2,500 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2500.00
1910.184 I09 III
- Issued
- Jul 25, 2008
- Abate by
- Aug 27, 2008
Recent events (2)
- — I (S)
- — Z (S)
1910.212 A01
- Issued
- Jul 25, 2008
- Abate by
- Sep 22, 2008
- Penalty
- Initial $2,000 · Current $1,000 Reduced
Recent events (2)
- — I (S) $1000.00
- — Z (S) $2000.00
1910.184 E01
- Issued
- Jul 25, 2008
- Abate by
- Sep 23, 2009
Recent events (3)
- — P (O)
- — I (O)
- — Z (O)
1910.184 E03 I
- Issued
- Jul 25, 2008
- Abate by
- Oct 15, 2008
Recent events (2)
- — I (O)
- — Z (O)
1910.305 G02 III
- Issued
- Jul 25, 2008
- Abate by
- Aug 12, 2008
More inspections at Republic Engineered Products
View Republic Engineered Products's full OSHA safety record →
More inspections in this industry (NAICS 331221)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311492201.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.