RATHDRUM, ID —
OSHA Inspection: DYNAMIC FABRICATORS, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of DYNAMIC FABRICATORS, LLC in 22515 W HIGHWAY 53, RATHDRUM, ID 83858 (NAICS 333415). OSHA activity number 311577910.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DYNAMIC FABRICATORS, LLC
- Site address
- 22515 W HIGHWAY 53
- City
- RATHDRUM
- State
- ID
- ZIP
- 83858
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333415
- SIC code (legacy)
- 3443
- Employees
- 49
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
11 citations on file for this inspection.
1910.1000 A02
- Issued
- Feb 20, 2009
- Abate by
- Aug 27, 2009
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.1000 E
- Issued
- Feb 20, 2009
- Abate by
- Aug 27, 2009
Recent events (2)
- — I (S)
- — Z (S)
5(a)(1)
- Issued
- Feb 12, 2009
- Abate by
- Feb 17, 2009
- Penalty
- Initial $2,500 · Current $1,625 Reduced
E200
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employmnent and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to combustible dust hazards: a) Detail Shop: On or about 8/27/08, and times prior thereto, employees were exposed to fire and explosion hazards while performing work operations in the detail shop. Combustible dust was not being cleaned up in a manner that did not allow deposits to build on the workfloor and equipment in the work area. b) Detail Shop: On or about 8/27/08, and times prior thereto, employees were utilizing compressed air to blow out the filters of the ventilation system in shop; exposing employees to the potential of electrostatic discharge conditions igniting combustible dust deposits in the work area. c) Detail Shop: On or about 8/27/08, and times prior thereto, employees were exposed to combustible dust hazards due to to not having operation and maintenance procedures for work processes involving exposure to combustible dusts. d) Detail Shop: On or about 8/27/08, and times prior thereto, employees were exposed to combustible dust hazards due to to not training employees on the hazards of for work processes involving exposure to combustible dusts. Among other methods, one feasible means of abatement for this condition would include following the requirements for controlling and mitigating the hazards of combustible particulates included in National Fire Protection Association Standard 654: Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids, 2006 Edition. Abatement Certification and Documentation are required for this item.
Recent events (2)
- — I (S) $1625.00
- — Z (S) $2500.00
1910.22 A01
- Issued
- Feb 12, 2009
- Abate by
- Feb 24, 2009
Recent events (2)
- — I (S)
- — Z (S)
1910.134 E01
- Issued
- Feb 12, 2009
- Abate by
- Feb 24, 2009
- Penalty
- Initial $750
Recent events (2)
- — I (O)
- — Z (O) $750.00
1910.134 F01
- Issued
- Feb 12, 2009
- Abate by
- Feb 17, 2009
- Penalty
- Initial $1,000 · Current $500 Reduced
Recent events (2)
- — I (S) $500.00
- — Z (S) $1000.00
1910.134 F02
- Issued
- Feb 12, 2009
- Abate by
- Feb 17, 2009
Recent events (2)
- — I (S)
- — Z (S)
1910.134 G01 IIIA
- Issued
- Feb 12, 2009
- Abate by
- Feb 12, 2009
Recent events (2)
- — I (S)
- — Z (S)
1904.29 B03
- Issued
- Feb 12, 2009
- Abate by
- Feb 17, 2009
- Penalty
- Initial $500 · Current $250 Reduced
Recent events (2)
- — I (O) $250.00
- — Z (O) $500.00
1904.32 B03
- Issued
- Feb 12, 2009
- Abate by
- Feb 24, 2009
Recent events (2)
- — I (O)
- — Z (O)
1910.1200 F05 I
- Issued
- Feb 12, 2009
- Abate by
- Feb 17, 2009
Recent events (2)
- — I (O)
- — Z (O)
More inspections at Dynamic Fabricators, LLC
View Dynamic Fabricators, LLC's full OSHA safety record →
More inspections in this industry (NAICS 333415)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311577910.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.