NORWOOD, NC —
OSHA Inspection: STANLY FIXTURES COMPANY, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of STANLY FIXTURES COMPANY, INC. in 11635 HWY 138, NORWOOD, NC 28128 (NAICS 337215). OSHA activity number 311596340.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STANLY FIXTURES COMPANY, INC.
- Site address
- 11635 HWY 138
- City
- NORWOOD
- State
- NC
- ZIP
- 28128
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- SIC code (legacy)
- 2541
- Employees
- 100
- Ownership type
- A
- Industry flags
- Manufacturing health.
Citations
24 citations on file for this inspection.
95012901
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $263 · Current $263
General-duty citation text
North Carolina General Statute 95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards while working in a personnel basket: a)receiving, the personnel basket used with the forklift to lift personnel was not provided with standard railings and the plywood bottom showed signs of rot. Reference: The American National Standards Institute (ANSI) Safety Standard For Powered Industrial Trucks, ANSI B56.1-1975, Section 427, on elevated platforms. Among other methods, one feasible and acceptable method to abate this hazard is to install standard railing which includes a top rail between 36" to 42" in height, a mid- rail installed half way between the top rail and floor of platform, and a toe board installed around the floor of the platform which measures at least 4" in height.
1910.107 C06
- Issued
- Dec 7, 2007
- Abate by
- Jan 28, 2008
- Penalty
- Initial $375 · Current $375
1910.107 C06
- Issued
- Dec 7, 2007
- Abate by
- Jan 28, 2008
1910.107 D04
- Issued
- Dec 7, 2007
- Abate by
- Jan 28, 2008
1910.212 A01
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
- Penalty
- Initial $375 · Current $375
1910.213 C03
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $375 · Current $375
1910.213 H01
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $375 · Current $375
1910.213 J03
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $375 · Current $375
1910.213 P01
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $225 · Current $225
1910.213 R04
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
- Penalty
- Initial $525 · Current $525
1910.219 C04 I
- Issued
- Dec 7, 2007
- Abate by
- Jan 4, 2008
- Penalty
- Initial $225 · Current $225
1910.24 H
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.106 E02 IIB2
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.107 B03
- Issued
- Dec 7, 2007
- Abate by
- Dec 17, 2007
1910.107 B09
- Issued
- Dec 7, 2007
- Abate by
- Jan 4, 2008
1910.134 C02 I
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.147 C07 IV
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.213 B06
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.242 B
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.253 B04 III
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.303 B02
- Issued
- Dec 7, 2007
- Abate by
- Dec 19, 2007
1910.334 A02 I
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
1910.1030 G02 IIC
- Issued
- Dec 7, 2007
- Abate by
- Jan 4, 2008
1910.1200 F05 I
- Issued
- Dec 7, 2007
- Abate by
- Dec 12, 2007
More inspections at Stanly Fixtures Company, INC.
View Stanly Fixtures Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in NC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 311596340.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.